Quick question.
Before I go into my garage and scratch my head (balls) wondering how I get them off. Do I need to undo the 8 screws and take the carb plate off, or do they just 'pull off''?
NC30 Velocity Stack Removal
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
alexwitham
- Site Supporter
- Posts: 1340
- Joined: Wed May 20, 2009 10:04 pm
- Bike owned: 675R, GSXR6, NC30
- Location: Norwich
-
bikemonkey
- NWAA Supporter
- Posts: 1521
- Joined: Tue Dec 27, 2011 12:33 pm
- Bike owned: 92 NC30, 90 VFR750
- Location: Oxfordshire
Re: NC30 Velocity Stack Removal
You need to take the top plate off, and putting it back on means you'll probably need to loosen the screws holding the carbs together. At least you might, I found it too hard to do without loosening them all up.
-
alexwitham
- Site Supporter
- Posts: 1340
- Joined: Wed May 20, 2009 10:04 pm
- Bike owned: 675R, GSXR6, NC30
- Location: Norwich
Re: NC30 Velocity Stack Removal
OK I thought that'd be the case. Thanks for the hint on putting the plate back on.
Alex
Alex