NC30 Replacement side stand rubber

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
BB_158
Site Supporter
Site Supporter
Posts: 180
Joined: Mon Jul 30, 2012 1:16 pm
Bike owned: is half tidy
Location: S Wales

NC30 Replacement side stand rubber

Post by BB_158 » Thu Nov 22, 2012 2:31 pm

Hi,
Does anyone know where I can source a replacement rubber thingy fitted at the end of the side stand?
I am new to the NC30 fold, but usual hinternet searches don't come up with anything.
Regards,
Top
User avatar
bikemonkey
NWAA Supporter
NWAA Supporter
Posts: 1521
Joined: Tue Dec 27, 2011 12:33 pm
Bike owned: 92 NC30, 90 VFR750
Location: Oxfordshire

Re: NC30 Replacement side stand rubber

Post by bikemonkey » Thu Nov 22, 2012 2:39 pm

Get onto david silver spares or cmnsl.

http://www.davidsilverspares.co.uk/part ... mber_7334/

http://www.cmsnl.com/honda-vfr400r3-199 ... ml#results


Oh and welcome :rocks:
Top
User avatar
BB_158
Site Supporter
Site Supporter
Posts: 180
Joined: Mon Jul 30, 2012 1:16 pm
Bike owned: is half tidy
Location: S Wales

Re: NC30 Replacement side stand rubber

Post by BB_158 » Thu Nov 22, 2012 4:24 pm

Brilliant, thanks.
Top
davlr
Settled in member
Posts: 51
Joined: Mon Jan 17, 2011 3:03 pm
Bike owned: NC30 35 23 APRILIA RS!

Re: NC30 Replacement side stand rubber

Post by davlr » Thu Nov 22, 2012 4:42 pm

Don't forget the little metal thing inside. When I replaced mine I drilled out the rubber and damaged it.
Top
Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: NC30 Replacement side stand rubber

Post by Neosophist » Fri Nov 23, 2012 1:35 am

drilled out?

I replaced mine and I thuoght it just unbolts, pulls out and swaps over?
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
User avatar
VFRkieran
Site Supporter
Site Supporter
Posts: 839
Joined: Fri May 06, 2011 8:37 pm
Bike owned: NC30, NSR250, CBR600, TS125
Location: Oxfordshire

Re: NC30 Replacement side stand rubber

Post by VFRkieran » Fri Nov 23, 2012 3:44 am

Neosophist wrote:drilled out?

I replaced mine and I thuoght it just unbolts, pulls out and swaps over?

Same with mine, should be a little metal tube that sits in a hole in the rubber for the bolt to slide through, no drilling needed.
Top
Post Reply

Return to “Honda - Workshop”