Cbr400 nc29 steerer stem dimensions

dunkenb · Post by **dunkenb** » Tue Nov 06, 2012 10:32 am

Anybody out there know the dimensions of the steerer stem on the nc29?
I need to know the length and various diameters to get an alloy steerer made to fit into a zxr400L bottom yoke.
I'm trying to do it without taking my 29 to pieces as i need it to get to work.
Cheers
Dunk

Post by **tanuki** » Tue Nov 06, 2012 12:12 pm

is the ZXR stem pressed into the yokes like the honda item?

you would probably be better buying a 2nd hand bottom yoke and stem and taking that and your ZXR item to your engineer and saying.....put that on that!

dunkenb · Post by **dunkenb** » Tue Nov 06, 2012 2:29 pm

Yeah, that was my next option, seen a few on ebay for £20.

dunkenb · Post by **dunkenb** » Tue Nov 06, 2012 2:44 pm

Ok anyone know if the 23 and 29 stem are the same as the 23 ones are loads cheaper?

dunkenb · Post by **dunkenb** » Sat Nov 10, 2012 2:18 pm

well managed to get an nc29 one for £17.50 inc p&p. result

Cbr400 nc29 steerer stem dimensions

Cbr400 nc29 steerer stem dimensions

Re: Cbr400 nc29 steerer stem dimensions

Re: Cbr400 nc29 steerer stem dimensions

Re: Cbr400 nc29 steerer stem dimensions

Re: Cbr400 nc29 steerer stem dimensions