Nc30 gear change issue

Post by **V4beermonster** » Mon Oct 22, 2012 7:32 pm

Hi guys bit if a weird 1 I've noticed the last few weeks the bike has started to seem harder to select gears, when I say harder I mean more force needed still goes in ok just with more of clunk. Not sure what it could be but even my mate said was fairly hard to get in gear. Bike runs like a dream oil level is fine. Clutch is good not dragging. Anyone got any ideas??

Post by **porndoguk** » Mon Oct 22, 2012 8:35 pm

you may have the clutch cable a little too loose,

or try moving the pedal position and or moving the clamp on the gear selector shaft by a spline forward of back of the staked dot. mines a bugger to change but its a case of fine tuning to find what suits you best.

Post by **V4beermonster** » Mon Oct 22, 2012 9:37 pm

Mm cheers for reply, it seems to have only just started so how, was easy to change at first any ideas

Post by **porndoguk** » Mon Oct 22, 2012 9:51 pm

tlnut wrote:Mm cheers for reply, it seems to have only just started so how, was easy to change at first any ideas

Cable may have stretched, or the adjusters may have vibrated loose not uncommon bud.

Nc30 gear change issue

Nc30 gear change issue

Re: Nc30 gear change issue

Re: Nc30 gear change issue

Re: Nc30 gear change issue