Rebuilding the whole wiring loom

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
alexandervf
Settled in member
Posts: 109
Joined: Mon Jul 06, 2009 3:08 pm
Bike owned: NC35
Location: Greece

Re: Rebuilding the whole wiring loom

Post by alexandervf » Tue Oct 09, 2012 3:03 pm

thunderace wrote:So a major part of the cost is shipping then?
Obviously, you did not take a look at the prices, or did any adding up of the prices.

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: Rebuilding the whole wiring loom

Post by Neosophist » Tue Oct 09, 2012 3:27 pm

I see.

I thought the generator cable would be expensive as resin coated, but i've never wound one myself, turns out to be cheaper than I though, I might keep that in mind for when I next have a project :)

Great project though and I know the satisfaction of doing something yourself.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

alexandervf
Settled in member
Posts: 109
Joined: Mon Jul 06, 2009 3:08 pm
Bike owned: NC35
Location: Greece

Re: Rebuilding the whole wiring loom

Post by alexandervf » Tue Oct 09, 2012 5:44 pm

Neosophist wrote:I see.

I thought the generator cable would be expensive as resin coated, but i've never wound one myself, turns out to be cheaper than I though, I might keep that in mind for when I next have a project :)

Great project though and I know the satisfaction of doing something yourself.
I can give you a few good tips when you are ready to try...

Post Reply