Hi
Just been out for a first run today.
Getting some odd running issues around 5500rpm when on the move.
Doesn't seem to be any problems when the bike revs higher.
Any thoughts?
Nc23 poor running at low revs
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
greencbr400
- Settled in member
- Posts: 5
- Joined: Wed Mar 07, 2012 5:31 pm
-
dunkenb
- Regular Member
- Posts: 560
- Joined: Wed Jun 03, 2009 9:39 pm
- Bike owned: Cbr400rr nc29 type8 NSR250
- Location: West Midlands
Re: Nc23 poor running at low revs
What issues you getting?
-
greencbr400
- Settled in member
- Posts: 5
- Joined: Wed Mar 07, 2012 5:31 pm
Re: Nc23 poor running at low revs
Like a misfire. Idles ok, run fine in the top band but around 5k it runs badly. Any ideas?
-
Davez29
- Site Supporter
- Posts: 1268
- Joined: Sun Aug 03, 2008 8:38 pm
- Bike owned: NC29 forever
Re: Nc23 poor running at low revs
Is it a standard set of pipes? Carbs clean and set up right?
-
greencbr400
- Settled in member
- Posts: 5
- Joined: Wed Mar 07, 2012 5:31 pm
Re: Nc23 poor running at low revs
Not sure about the pipes, end can isn't stock. Carbs have been balanced but not cleaned. Any advice as to the best approach to cleaning carbs?