WHEEL BEARING FRONT AND REAR SAME?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
paddy_nc29
- Settled in member
- Posts: 21
- Joined: Sat Dec 03, 2011 3:51 pm
- Bike owned: NC29 x 2
WHEEL BEARING FRONT AND REAR SAME?
As title, are the front and rear bearings the same for a '91 NC29. Just wondering as there is a variation of price on ebay...
-
Pleiades
- Settled in member
- Posts: 93
- Joined: Tue Aug 11, 2009 5:57 am
- Bike owned: 2008 R6 Race Bike
- Location: Amsterdam
Re: WHEEL BEARING FRONT AND REAR SAME?
You need three bearings for the rear, two are the same as the front, according to cmsnl.com. So, four bearings are part number 91054MAM003 . The extra for the rear is 91073MV4782
Waiting for my Haynes manual to arrive, which would allow me to answer definitively, but the diagram at cmsnl is pretty clear.
Waiting for my Haynes manual to arrive, which would allow me to answer definitively, but the diagram at cmsnl is pretty clear.
-
gullarm
- Settled in member
- Posts: 187
- Joined: Tue Apr 26, 2011 1:12 pm
Re: WHEEL BEARING FRONT AND REAR SAME?
The front and rear wheel bearings are the same size. You will more than likely destroy the bearings getting them out without the proper tools.
You can use the old bearing to tap in the new ones.
The rear sprocket carrier has a larger bearing fitted. This prob wont need changing, I had my wheels powder coated so didn't need to change the sprocket bearing.
You can use the old bearing to tap in the new ones.
The rear sprocket carrier has a larger bearing fitted. This prob wont need changing, I had my wheels powder coated so didn't need to change the sprocket bearing.