The nc24 has 15T-45T, so a ratio of 3
The nc30 has a 40T rear
So a set up of 13T-40T would give a ratio of 3.08
a set up of 14T-42T would also give a ratio of 3
NC24 Engine NC30 Frame??
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Tim400GB
- Site Supporter
- Posts: 753
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: NC24 Engine NC30 Frame??
Yes, I was thinking of front sprocket.Timon wrote:Other way around isn't it?Neosophist wrote:(it'll acellerate fast with a 40T NC30 sprocket though!)
putting a 40T on a nc24 you'd lose acceleration
While that is the actualy sprocket ratio you'd want to look at internal gearing differences to determine rpm etc and what will be best.
I'll dig the information out soon
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...