Anyone esle got one?
Mine arrived with no instructions I think I've worked out the assembly but it seems completely unstable? The part that connects the wheels to the upper part of the stand are connected with pins with clips and just flop about, is this correct?
Confused or what
ricambi weiss front headstock stand
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
oldgreyandslow
- Site Supporter
- Posts: 421
- Joined: Fri Jun 10, 2011 2:59 pm
- Bike owned: 1990 NC30
- Location: Farnborough
-
oldgreyandslow
- Site Supporter
- Posts: 421
- Joined: Fri Jun 10, 2011 2:59 pm
- Bike owned: 1990 NC30
- Location: Farnborough
Re: ricambi weiss front headstock stand
Ignore the above
Sorted! Muppet that I am!
Now its wheels off!
Sorted! Muppet that I am!
Now its wheels off!
-
jetblack
- Site Supporter
- Posts: 516
- Joined: Sat Apr 24, 2010 5:21 pm
- Bike owned: '89 NC30 SEED
- Location: Nottingham
Re: ricambi weiss front headstock stand
I had the same questions when i got mine! Took me an hour of head scratchingto work it out.
If you stick a long 19mm socket on the lifting pin it gives that little bit more clearance so it doesn't rub on the underside of the nose cone and makes the fit in the headstock tube a litle bit firmer.
Enjoy!
If you stick a long 19mm socket on the lifting pin it gives that little bit more clearance so it doesn't rub on the underside of the nose cone and makes the fit in the headstock tube a litle bit firmer.
Enjoy!