My old art can has an angled inlet pipe is there an adapter that I need for it
Many thanks Pete
Help fitting new exhaust
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Causon67
- Settled in member
- Posts: 119
- Joined: Fri Jan 28, 2011 12:29 am
- Bike owned: NC30
- Location: Gloucestershire, UK
Help fitting new exhaust
I have an nc30 I got a new scorpion exhaust end can I tried to fit it and it seems that it's not the correct angle on the inlet
My old art can has an angled inlet pipe is there an adapter that I need for it
Many thanks Pete
My old art can has an angled inlet pipe is there an adapter that I need for it
Many thanks Pete
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Help fitting new exhaust
Is it for an NC30?
http://www.ebay.co.uk/itm/Scorpion-Link ... 4ab0a74c6e
found this on ebay.
The only other 'Scorpion' NC30 exhaust on ebay already has the bend on the end-can.
Why change it though? The Art cans make a nice noise?
http://www.ebay.co.uk/itm/Scorpion-Link ... 4ab0a74c6e
found this on ebay.
The only other 'Scorpion' NC30 exhaust on ebay already has the bend on the end-can.
Why change it though? The Art cans make a nice noise?
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
Causon67
- Settled in member
- Posts: 119
- Joined: Fri Jan 28, 2011 12:29 am
- Bike owned: NC30
- Location: Gloucestershire, UK
Re: Help fitting new exhaust
Stainless steel can to carbon
-
iDemonix
- Site Supporter
- Posts: 651
- Joined: Tue Aug 24, 2010 10:26 pm
- Bike owned: '92 NC30
- Location: Banbury, Oxfordshire
Re: Help fitting new exhaust
iirc there's an adapter that changes the angle, a little bent pipe.
A roaring V4 is the summer soundtrack.
-
spud
- Settled in member
- Posts: 125
- Joined: Tue Apr 12, 2011 11:21 pm
- Bike owned: vfr nc30 1990 , yamaha rs 100
- Location: norwich , norfolk
Re: Help fitting new exhaust
hi chap ,
think this is what you will need , http://www.google.co.uk/url?sa=t&rct=j& ... UJT7HFspmw,
but check the size of the inlet of ur new end can , as the link pipes come in different sizes ,
spud
think this is what you will need , http://www.google.co.uk/url?sa=t&rct=j& ... UJT7HFspmw,
but check the size of the inlet of ur new end can , as the link pipes come in different sizes ,
spud