I cant get my nc30 to fire!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Posts: 7
- Joined: Tue May 24, 2011 11:36 pm
I cant get my nc30 to fire!
could anyone tell my why my bike won't start when i have spark on my plugs and petrol in the cylinders??
- Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: I cant get my nc30 to fire!
Good chance it's flooded.
You can still get a spark at the plugs but failure to ignite the fuel if it's flooded.
You can still get a spark at the plugs but failure to ignite the fuel if it's flooded.
"It's just a ride" Bill Hicks
- Lane
- Site Supporter
- Posts: 127
- Joined: Sun May 29, 2011 11:34 am
- Bike owned: MC21,MC22,NC35's,VJ22
- Location: Sydney, Australia
Re: I cant get my nc30 to fire!
A bit more info and a bit of background information will aid others in helping, you'll get more replies.
-
- Settled in member
- Posts: 7
- Joined: Tue May 24, 2011 11:36 pm
Re: I cant get my nc30 to fire!
i got the bike running today but its not running like it should, i has to have choke to start and there is absolutely nothing happening under 6000 rpm
its worth noticing that the bike is an import from Thailand and i live in norway so the jets won't be the correct size, right?
its worth noticing that the bike is an import from Thailand and i live in norway so the jets won't be the correct size, right?
- Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: I cant get my nc30 to fire!
Sounds like blocked carbs. A good start would be to take the carbs off, check all teh jets and settings and clean them.
All of this is covered in the carb jetting guide sticky thread in the V4 workshop section.
All of this is covered in the carb jetting guide sticky thread in the V4 workshop section.
"It's just a ride" Bill Hicks