fork pinch bolts

Post by **leef82** » Mon Jun 20, 2011 6:35 pm

does any one know any where that sells the four pinch bolts on the bottom of the fork legs(nc30) in stainless or titanium as ive just had the bottoms powdercoated the originals look shity and rusty,

Post by **Drunkn Munky** » Mon Jun 20, 2011 6:39 pm

Take ya pick http://shop.ebay.co.uk/i.html?_nkw=fork ... m270.l1313
Some of the Titainium bolts listed for other models may fit, most use the same pitch thread

Post by **Hadies** » Mon Jun 20, 2011 6:43 pm

www.tastynuts.com
Pro bolt stuff. Not cheap though.
I would check the bolt sizes on pro bolt and hunt for cheaper alternatives on ebay.

Post by **mick.mh2racing** » Mon Jun 20, 2011 7:05 pm

Have a look at http://www.stagonset.co.uk/
Used them a few times and not been disappointed.

Post by **lizard821000** » Mon Jun 20, 2011 7:08 pm

any fastener and fixing shop will stock the bolts you need, no need for expensive pro bolt stuff, unless you like giving your money away ,imo anyway.

Post by **Dynamohum** » Tue Jun 21, 2011 12:59 am

lizard821000 wrote:any fastener and fixing shop will stock the bolts you need, no need for expensive pro bolt stuff, unless you like giving your money away ,imo anyway.

agreed the pro bolt stuff is good quality kit looks nice but your paying for the fact its blingy polished their bike specific nc30 panel fastener kits are over 70 quid and are just a load of generic bolts washers etc they don't have the step on the bolts like the original honda panel screws that are only £2 each from david silvers

fork pinch bolts

fork pinch bolts

Re: fork pinch bolts

Re: fork pinch bolts

Re: fork pinch bolts

Re: fork pinch bolts

Re: fork pinch bolts