A misfire issue has come up on my bike.
First gear will rev cleanly through, but when its in 2nd or 3rd its slightly jumpy misfiring at about 10-14k
I removed my extra .5mm washers from the needles today and cleaned all the plugs but it hasnt made any difference.
This seems to have only come up when i refitted my rear exhust pipes. they were not fitted right before but it was running fine just noisey, they were refitted correctly and now it has the misfire.
Im running 117f 118r jets, ignitech, yamamoto half system, foam air filter.
NC30 misfire issue.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
ChowderV4
- Site Supporter
- Posts: 454
- Joined: Mon Aug 03, 2009 10:16 pm
- Bike owned: 94 Fzr 400 3TJ ZXR400 Racer
- Location: Hayle, Cornwall
-
CMSMJ1
- Moderators
- Posts: 7152
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: NC30 misfire issue.
Is it a misfire or just shit running?
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
-
ChowderV4
- Site Supporter
- Posts: 454
- Joined: Mon Aug 03, 2009 10:16 pm
- Bike owned: 94 Fzr 400 3TJ ZXR400 Racer
- Location: Hayle, Cornwall
Re: NC30 misfire issue.
well not sure, its sort of jumpy as if it suddently looses some power then you feel it jolt to full power again then dip again.