NC29 fork mods

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

NC29 fork mods

Post by Drunkn Munky » Thu Apr 28, 2011 9:59 pm

Right i have some NC30 fork bottoms with most of the internals and a complete set of MC18 NSR forks for which the stanchons are the same length as the NC29. I know i can fit the NSR stanchons to the NC30 bottoms but will all the NC30 internals work and can i fit some of them swanky RO NC30 fork tops to the NSR stanchons?
Top
User avatar
selexon
Site Supporter
Site Supporter
Posts: 114
Joined: Wed Dec 08, 2010 9:55 am
Bike owned: FZR400R 2TK, CBR400RR NC29
Location: Launceston, Tasmania
Contact:
Contact selexon

Re: NC29 fork mods

Post by selexon » Sun May 08, 2011 2:23 am

I would start with measuring the internal lengths etc. then you will have a better idea if they will fit in. If they are short you could always machine up some spacers etc.

If in doubt give your local suspension mob a call... And while your at it might as well put in some gold valves.
Top
rickee
Settled in member
Posts: 24
Joined: Fri May 20, 2011 12:47 pm

Re: NC29 fork mods

Post by rickee » Fri May 27, 2011 12:05 am

I had a set from Graeme a few years ago... he said they were a total bitsa, CBR lowers on VFR stanchions and over long springs. built up they were a bit shorter than stock but once on the handling of the bike was superb!
Top
tanuki
Site Supporter
Site Supporter
Posts: 1571
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K

Re: NC29 fork mods

Post by tanuki » Fri May 27, 2011 11:53 am

The VFR bottoms are a diect fit onto the Maxtons you have just bought mate.

Do it when you change the oil.
Top
Post Reply

Return to “Honda - Workshop”