Anyone fitted a Koso dash to a 29?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
tanuki
Site Supporter
Site Supporter
Posts: 1571
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K

Anyone fitted a Koso dash to a 29?

Post by tanuki » Thu May 19, 2011 2:50 pm

cos I may need some help.
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: Anyone fitted a Koso dash to a 29?

Post by Drunkn Munky » Thu May 19, 2011 3:03 pm

:lol: good luck!

Na its pretty simple once you've torn those instructions up, where you taking the rev pickup from? i took it straight from the cdi so if your doing the same you might not need to alter it.
Top
stenca
Settled in member
Posts: 16
Joined: Fri Jun 18, 2010 12:17 pm
Bike owned: CBR400RR NC29
Location: The Netherlands

Re: Anyone fitted a Koso dash to a 29?

Post by stenca » Thu May 19, 2011 5:46 pm

Here's a link to the manual ( PDF )

http://www.kosonorthamerica.com/fCMSBac ... 022W10.pdf

Maybe this will help

8-)
Top
cajun
Familiar Member
Posts: 264
Joined: Sat Jun 13, 2009 4:06 am
Bike owned: MC22, NC29,NC35, 2 FZR400's
Location: New Orleans, LA USA

Re: Anyone fitted a Koso dash to a 29?

Post by cajun » Sat May 21, 2011 7:13 am

What is the cost of one? I am using a XT racing dash and it is ACE!! It does everything and then some.
Top
garyboy_palaboy
Familiar Member
Posts: 267
Joined: Sun May 04, 2008 9:43 am

Re: Anyone fitted a Koso dash to a 29?

Post by garyboy_palaboy » Thu May 26, 2011 11:56 am

i got one on my nc29.

before i got issues on getting the correct reading for the tachometer, as i have using my old harness which is really a headache of tracing the problem. so i used of winding the induction coil with wire to get the reading. honestly, the reading is bad.

now, i got a second hand wiring harness and ignitech cdi, tap the rev wire from koso directly from the cdi and the reading is magnificent!!!!

lesson learned, if you have a faulty reading on the direct connection from cdi, check the harness that might be any grounded wires. check also the setting on the koso ofcourse.
Top
tanuki
Site Supporter
Site Supporter
Posts: 1571
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K

Re: Anyone fitted a Koso dash to a 29?

Post by tanuki » Thu May 26, 2011 12:06 pm

Haven't got any pics of your wiring or a diagram have you?
Top
Post Reply

Return to “Honda - Workshop”