Neutral issue

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Zaz
Settled in member
Posts: 37
Joined: Tue Apr 28, 2009 7:12 am
Location: Barry, outside Cardiff

Re: Neutral issue

Post by Zaz » Fri Apr 22, 2011 8:53 am

Ive put a new cable in already
Top
DrunkenMistake
Settled in member
Posts: 41
Joined: Sat Apr 16, 2011 10:13 am
Bike owned: Honda VFR 400 NC30
Location: Dunedin, New Zealand

Re: Neutral issue

Post by DrunkenMistake » Sun Apr 24, 2011 10:44 am

try an oil change and put in full synthetic and change the filter too, if that doesnt help it it could be your clutch plates
Top
Zaz
Settled in member
Posts: 37
Joined: Tue Apr 28, 2009 7:12 am
Location: Barry, outside Cardiff

Re: Neutral issue

Post by Zaz » Sun Apr 24, 2011 10:50 am

Zaz wrote:I replaced my clutch friction and steel plates with OE parts, changed the clutch nut, put a new gasket on the crackcase cover, put in fresh oil (twice, once to flush, once to run), put a new OE clutch cable in following existing routing.

Opening post ;)
Top
hunter
Site Supporter
Site Supporter
Posts: 1292
Joined: Thu Nov 20, 2008 1:09 pm

Re: Neutral issue

Post by hunter » Sun Apr 24, 2011 11:11 am

It has been said on here before,finding neutral on these bikes is a common thing,
I bought a brand new NC in 1990 and it had the same problem,you have just got to get used to it.
Top
Zaz
Settled in member
Posts: 37
Joined: Tue Apr 28, 2009 7:12 am
Location: Barry, outside Cardiff

Re: Neutral issue

Post by Zaz » Sun Apr 24, 2011 12:42 pm

I appreciate the help but the last few posts are just repeats of whats already been said and not been read before reply, so probably best left now, or thread closed, thanks all :)
Top
Post Reply

Return to “Honda - Workshop”