30 engine into 35

[mo haggs]

About spacing the sprocket, I had to do it the other way round, 35 engine in 30 frame, so had to space out rear sprocket carrier.Please check for exact offset as 5mm quoted from memory... and did this 3 years ago.

no worries - thanx for the heads up.

Mo, try and pickup a G-force adaptor kit for the gixxer kit, Im pretty sure i got mine all in for under £300

think im just goin to put in a standard unit for now and do the genny mod a bit down the line

[Drunkn Munky]

Well i can confirm that the chain run is visually out so yes we do need a spacer, now we just need to find out the exact measurement. surely someones done this before?????

[mo haggs]

you're further along than i am so im no help at the min

[Drunkn Munky]

ive got a 5mm spacer on the way, i'll let you know if it works

[mo haggs]

[Drunkn Munky]

Forgot to update this, i ended up with the RO chain spacer kit (only the front sprocket part) which spaces the front sprocket out 5mm. Visually it looks spot on and so far ive done atleast 100 miles on it with no problems.

[fourfingers]

Guess my memory is not that bad after all... Nice to hear everything is going fine

[mo haggs]

nice one, im waiting for a few parts to arrive so i can go a little further