hi, my nc35 had been modified with a switch that can control the headlights (on/off) by the previous owner
it has been working fine for quite abit, however recently it failed...
i thought it was the simple problem of the switch fuse melting. i brought it to a few mechanics for their diagnostics
one of them told me that i could just change the switch. another one told me i had to change my right-hand starter switch or my entire electrical system could fail as it controls the current going through the bike...
any thoughts on this? i thought the electrical starter was just for starting the bike?
i dont really trust the mechanics in my town as they have more passion for money rather than bikes...
problems with headlight!
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
niteblade
- Settled in member
- Posts: 88
- Joined: Tue Dec 28, 2010 12:08 pm
- Bike owned: NSR150SP, RVF400
-
uber pikey
- Site Supporter
- Posts: 353
- Joined: Sun Aug 15, 2010 9:58 pm
- Bike owned: NC30, GS700e GSX750 katana pop
- Location: Telford/Wolverhampton
Re: problems with headlight!
Yeh I have an idea, why don't you open the switches up to start with and have a look!
I saw it so I took it!
-
niteblade
- Settled in member
- Posts: 88
- Joined: Tue Dec 28, 2010 12:08 pm
- Bike owned: NSR150SP, RVF400
Re: problems with headlight!
im not very good with electrical stuff, but seems to me like the switch is working...uber pikey wrote:Yeh I have an idea, why don't you open the switches up to start with and have a look!