nc23 limit

Post by **petrolhead19** » Tue Jan 04, 2011 5:17 pm

im using the sprocket cover and speedo drive from the new engine, i might try putting the old one back on see if that helps.

The only thing i have messed about with are the electrics

Matchlessman · Post by **Matchlessman** » Wed Jan 05, 2011 4:37 pm

As a quickie, try disconnecting the speedo cable. that should tell you if its hitting a top speed limiter.

Did you do a compression test on the engine before fitting it? presumably as well you made sure it didnt have 33bhp restrictor washers in.

Post by **petrolhead19** » Wed Jan 05, 2011 6:40 pm

well i will try that this weekend and yes i did a compression test and everything was fine,

i had the carbs off but didnt notice any washers but im taking the carbs off this weekend so will double check

Post by **Wozza** » Thu Jan 06, 2011 2:50 pm

Are you using the same carbs as before or did the engine come with a set?

Post by **petrolhead19** » Thu Jan 06, 2011 7:05 pm

the engine did come with a set but i am using my carbs off the old engine as i know there perfect and nothing wrong with them, plus couldnt be bothered stripping and cleaning the carbs that came with the engine lol

nc23 limit

Re: nc23 limit

Re: nc23 limit

Re: nc23 limit

Re: nc23 limit

Re: nc23 limit