Has anyone got the torque settings for a 1996 nc35 front end and fork legs toqrues has ive got to do the fork seals on them but cant find the torque setting anywhere ??
Thanks
1996 nc35 front end torque settings
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
swdesigns
- Settled in member
- Posts: 50
- Joined: Thu Dec 31, 2009 11:03 pm
-
Speedy
- NWAA Supporter
- Posts: 483
- Joined: Fri May 02, 2008 8:29 pm
- Bike owned: RVF400RR, ER6n
- Location: Middx, U.K.
Re: 1996 nc35 front end torque settings
Haynes manuals have most of the torque settings you need!:
Top yoke fork clamp bolts - 23Nm
Bottom yoke fork clamp bolts - 40Nm
Fork damper rod bolt - 20Nm
Fork top bolt - 35Nm
Front brake caliper mounting bolts - 31Nm
Front axle bolt - 60Nm
Front axle clamp bolts - 22Nm
That should be all the settings you'll need for the job!
Top yoke fork clamp bolts - 23Nm
Bottom yoke fork clamp bolts - 40Nm
Fork damper rod bolt - 20Nm
Fork top bolt - 35Nm
Front brake caliper mounting bolts - 31Nm
Front axle bolt - 60Nm
Front axle clamp bolts - 22Nm
That should be all the settings you'll need for the job!
When the mind is relaxed, the body will go faster!
-
swdesigns
- Settled in member
- Posts: 50
- Joined: Thu Dec 31, 2009 11:03 pm
Re: 1996 nc35 front end torque settings
cheers mate really appericate it .
Regards
steve
Regards
steve