Tacho wiring...help please
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
neilwilson
- Settled in member
- Posts: 36
- Joined: Thu Aug 26, 2010 8:57 pm
- Bike owned: CBR400RR-L NC29 and Bandit 600
- Location: Sunderland
Tacho wiring...help please
h guys, my nc29 had been stripped of a tacho for some reason, anyhow i sourced a spare from a nc23. ive came to connect it up and there is an additional wiring on the 23 (not just an additional lamp) than the 29? looking through the drawings the 29 has 4 wires, green 12v supply to tacho and lamp? red negative from lamp? and a yellow and green from tacho? the 23 has 3 wires from the tacho unit (yellow/green, green and black/brown. Does anyone know what the additonal wire on the tacho unit is for?
-
jac_is_smiling
- Settled in member
- Posts: 65
- Joined: Mon Jan 19, 2009 5:39 pm
- Bike owned: Cagiva Planet, NC23 x2, FZ 600
- Location: Glasgow
Re: Tacho wiring...help please
Solid green is the earth/-ve wire for the whole unit.
Brown/white is +ve for the lights inside it.
Black/Brown is +ve for the tacho its self, the 29 doesnt have this.
Yellow/Green is signal wire for the tacho.
You will be able to take the +ve wire (black/brown) from the tacho and tap it into the black/brown wire for the temp gauge.
Brown/white is +ve for the lights inside it.
Black/Brown is +ve for the tacho its self, the 29 doesnt have this.
Yellow/Green is signal wire for the tacho.
You will be able to take the +ve wire (black/brown) from the tacho and tap it into the black/brown wire for the temp gauge.