Air/fuel mixture screws

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
Sam
Settled in member
Posts: 60
Joined: Wed Apr 30, 2008 5:20 pm

Air/fuel mixture screws

Post by Sam » Sat Aug 28, 2010 6:30 am

Can i adjust the air/fuel mixture screws whilst the carbs at in-situ on the bike?

Thanks.
Top
User avatar
porndoguk
Site Supporter
Site Supporter
Posts: 3293
Joined: Wed Jun 16, 2010 11:17 pm
Bike owned: NC30
Location: Middle England
Contact:
Contact porndoguk

Re: Air/fuel mixture screws

Post by porndoguk » Sat Aug 28, 2010 9:08 am

Sam wrote:Can i adjust the air/fuel mixture screws whilst the carbs at in-situ on the bike?

Thanks.
i assume you mean the pilot screws?

if so you will need a 300mm long flat blade screwdriver, and a torch. need upper and lower fairings off.

screwfix do a set of 3 wera for about £13.35
http://www.screwfix.com/app/sfd/cat/pro ... 0&ts=82814

hope this helps
Top
Post Reply

Return to “Honda - Workshop”