tank bracket

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
TROUBLED OTTER
Settled in member
Posts: 89
Joined: Mon May 31, 2010 2:12 pm
Bike owned: DUCATI STREETFIGHTER,NC35,250R
Location: PORTHCAWL,SOUTH WALES UK.

tank bracket

Post by TROUBLED OTTER » Wed Aug 04, 2010 10:58 am

Hi Guys,Anyone know if there is a bracket that the front of the tank fits into.I think mines missing. Image Image
Top
User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: tank bracket

Post by CMSMJ1 » Wed Aug 04, 2010 11:05 am

there is a rubber foot kind of jobbie that fits in the tank and rests on the frame...
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: tank bracket

Post by Drunkn Munky » Wed Aug 04, 2010 11:06 am

Nothing missing, the rubber moulding should slot into the cutout on the frame
Top
TROUBLED OTTER
Settled in member
Posts: 89
Joined: Mon May 31, 2010 2:12 pm
Bike owned: DUCATI STREETFIGHTER,NC35,250R
Location: PORTHCAWL,SOUTH WALES UK.

Re: tank bracket

Post by TROUBLED OTTER » Wed Aug 04, 2010 11:16 am

Doent seem to hold it nice and tight.At the rear of the tank there is a plastic wedge and thats it.I do have two little rubbers which seem to fit on the bottom outside lip of the tank too but dont know were.Trying to line this body to the tank. Image
Top
hunter
Site Supporter
Site Supporter
Posts: 1292
Joined: Thu Nov 20, 2008 1:09 pm

Re: tank bracket

Post by hunter » Wed Aug 04, 2010 12:18 pm

This is what you need mate.
http://cgi.ebay.co.uk/HONDA-VFR400-NC30 ... iewItem&pt
Top
User avatar
Drunkn Munky
Site Supporter
Site Supporter
Posts: 6313
Joined: Thu May 01, 2008 9:37 am
Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
Location: Kent

Re: tank bracket

Post by Drunkn Munky » Wed Aug 04, 2010 1:04 pm

The 2 rubber bumpstops you have are probably the ones that sit on the underside of the tank on each outer edge and should sit on the frame spars. If they dont touch get some 3mm think foam tape and run a strip along each frame spar, that usually stops the rocking. You should have a rubber cushion at the rear fixing not plastic.
Top
TROUBLED OTTER
Settled in member
Posts: 89
Joined: Mon May 31, 2010 2:12 pm
Bike owned: DUCATI STREETFIGHTER,NC35,250R
Location: PORTHCAWL,SOUTH WALES UK.

Re: tank bracket

Post by TROUBLED OTTER » Wed Aug 04, 2010 1:07 pm

Thanks for the help guys.I,ll have a play around with it tonight.
Top
Post Reply

Return to “Honda - Workshop”