One of my float valves is sticking open but it seems to be more related to the seat than the valve. On the 30, I remember these just threading out but on the 35, I can't see how you remove them. Are they replaceable?
Cheers!
Can NC35 float valve seats be replaced?
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
lordcalv
- Settled in member
- Posts: 10
- Joined: Fri Jun 13, 2008 11:37 pm
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Can NC35 float valve seats be replaced?
http://www.cmsnl.com/honda-rvf400rr-nc3 ... E16-1.html
Carburettor microfiche and parts.. doesn't look like that it comes out...
Carburettor microfiche and parts.. doesn't look like that it comes out...
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
lordcalv
- Settled in member
- Posts: 10
- Joined: Fri Jun 13, 2008 11:37 pm
Re: Can NC35 float valve seats be replaced?
Nightmare. I'll try a set of replacement valves and see how it goes.
Interestingly, the part number on the NC30 fiche appears to be for seats and valves and so is different to that of the NC35 (valves only)
So, next question is does anyoen know for sure if the valves are different?
Will give David Silver spares a shout to see how much NC35 ones are. There are some NC30 ones on fleabay (valves only) that I might take a chance on.
Interestingly, the part number on the NC30 fiche appears to be for seats and valves and so is different to that of the NC35 (valves only)
So, next question is does anyoen know for sure if the valves are different?
Will give David Silver spares a shout to see how much NC35 ones are. There are some NC30 ones on fleabay (valves only) that I might take a chance on.
-
Cammo
- Site Supporter
- Posts: 4505
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: Can NC35 float valve seats be replaced?
Yes, the nc30 valve seats screw out (10mm hex head). If you have a pic of the nc35 valves I can tell you if they're different to nc30 valves. I reckon they will be.lordcalv wrote: Interestingly, the part number on the NC30 fiche appears to be for seats and valves and so is different to that of the NC35 (valves only)
So, next question is does anyoen know for sure if the valves are different?
"It's just a ride" Bill Hicks
-
lordcalv
- Settled in member
- Posts: 10
- Joined: Fri Jun 13, 2008 11:37 pm
Re: Can NC35 float valve seats be replaced?
Wow, £26 plus VAT per valve! 
Thought just for a laugh I'd see how much brand new carbs were.... £400 + VAT. Per carb. A new set would be considerably more than what the bike is worth.
Cheers Cammo, I'm going to try one last idea to get the old ones working and if this fails, I'll post some pics to compare with NC30 ones.
Chris
Thought just for a laugh I'd see how much brand new carbs were.... £400 + VAT. Per carb. A new set would be considerably more than what the bike is worth.
Cheers Cammo, I'm going to try one last idea to get the old ones working and if this fails, I'll post some pics to compare with NC30 ones.
Chris