I am trying to find out if there are any company’s that produce oversized pistons for the NC30 as i am need of 4 with rings please,
Barrel is quite worn and could do with a slight bore out so needing a set of pistons that would be ever so slightly oversized above standard.
Can any one advise please or no of any contacts.
James
Looking for some Oversized Pistons
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
jamesvfr
- Settled in member
- Posts: 20
- Joined: Thu Jul 31, 2008 7:46 pm
- Bike owned: Honda VFR
- Location: Gloucester
- Contact:
-
micpec
- Site Supporter
- Posts: 1298
- Joined: Sat May 03, 2008 9:11 pm
- Bike owned: NC35’s, NC30 sold, MC34 many
- Location: The Netherlands
Re: Looking for some Oversized Pistons
hi james, check this post: viewtopic.php?f=11&t=15106
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"