Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
dr_46
- Settled in member
- Posts: 83
- Joined: Wed Jan 20, 2010 1:30 pm
Post
by dr_46 » Sun Jul 11, 2010 1:27 am
hi the other day i was riding and i heard a clunk i pulled over and i found a massive bolt in my catch tray of my rvf 400 i have no idea where it came from...the bike rode home fine but judging on the size of the bolt it looks important....it has written on it TMS 46 please help

-
rccaulfield
- Settled in member
- Posts: 65
- Joined: Sat Jan 30, 2010 9:09 pm
- Bike owned: nc35
- Location: Dublin, Ireland
Post
by rccaulfield » Sun Jul 11, 2010 7:58 am
Is it from the bottom of the rear shock linkage?
-
Specter
- Settled in member
- Posts: 3
- Joined: Fri May 02, 2008 9:39 pm
Post
by Specter » Sun Jul 11, 2010 3:44 pm
Front engine mounting propably?
-
Neosophist
- Moderators

- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Post
by Neosophist » Sun Jul 11, 2010 5:50 pm
Doesn't look like a standard Honda bolt. Could be from anywhere really.
Tried looking around the Radiator / Fan area?
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
duncan
- Settled in member
- Posts: 177
- Joined: Wed May 14, 2008 7:20 pm
Post
by duncan » Sun Jul 11, 2010 6:04 pm
It might not belong to your bike at all.It could be debris thrown up from the road
-
dr_46
- Settled in member
- Posts: 83
- Joined: Wed Jan 20, 2010 1:30 pm
Post
by dr_46 » Mon Jul 12, 2010 11:56 am
does any1 know where this size bolt would go...it might not be a honda bolt but i am worried its crutial and ill be killed lol
-
CMSMJ1
- Moderators

- Posts: 7152
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Post
by CMSMJ1 » Mon Jul 12, 2010 12:18 pm
Have you had a look?
it looks like a large bolt used on something other than Honda 400s..
So, have you checked anywhere that such a large bolt could be? Where do you imagine it might be from?
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
-
Neosophist
- Moderators

- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Post
by Neosophist » Mon Jul 12, 2010 1:28 pm
It could be from anywhere.
It's not a Honda bolt so it might not be the right length, and as somebody has already stated it might not even be off your bike, it could have been thrown up from the road.
You've only got to take the panels off and go around the bike looking at all the bolts, if you see a hole and that bolt fits, theres your problem.
You could always get hold of the NC30 microfiche and try to cross reference the bolt but it's probably easier just to look.
If it's off the bike it's got to be an external bolt (it wouldn't have come from inside the engine..) just go around with a marker pen and mark every bolt you see with a pen until you've checked everything.
If your still not sure get somone else to look over it and see if they can spot any unmarked bolts and / or any missing ones.
it's not hard...
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...