Please can some one list the voltage values for the Reg and Gen and any other common failing components that i would need to test with in the the ignition / charging system.
Thank you for your help, and i'm off out to try and buy a multi-meter here in Thailand, wish me luck with my limited Thai lol :D
karl
voltages for Reg and Gen
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
karl BKK
- Settled in member
- Posts: 195
- Joined: Wed May 19, 2010 12:17 pm
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: voltages for Reg and Gen
G'evening.
http://www.electrosport.com/technical-r ... iagram.pdf
^ ^
There you go.
Follow that through....
50v AC @ 5000rpm from each yellow wire (plug disconnected)
13.8 - 14.4v @ battery (check it at idle / 5000rpm)
Resistance 0.1 - 1.0 ohm between yellow wires.
no reistance between yellow wires and earth.
http://www.electrosport.com/technical-r ... iagram.pdf
^ ^
There you go.
Follow that through....
50v AC @ 5000rpm from each yellow wire (plug disconnected)
13.8 - 14.4v @ battery (check it at idle / 5000rpm)
Resistance 0.1 - 1.0 ohm between yellow wires.
no reistance between yellow wires and earth.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
karl BKK
- Settled in member
- Posts: 195
- Joined: Wed May 19, 2010 12:17 pm
Re: voltages for Reg and Gen
Fantastic, thank you so much :)