Does anyone know if any other model of vfr400 rear wheel will fit an NC24?
I am looking to take out the 18" and put in a 17" so my Mrs can touch the ground easier.
Any help much appreciated!
Looking for a 17" wheel for NC24
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
neilg50
- Settled in member
- Posts: 2
- Joined: Sun Apr 18, 2010 8:49 pm
-
duncan
- Settled in member
- Posts: 177
- Joined: Wed May 14, 2008 7:20 pm
Re: Looking for a 17" wheel for NC24
The nc24 rear wheel is retained by four nuts while the later nc30 only uses one so I suspect the answer to your question may be a no.The nc24 is a small bike with a low seat height so I am surprised it is still too tall for your mrs.
-
Neosophist
- Moderators
- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Re: Looking for a 17" wheel for NC24
nothing is going to be straightforward.
Do you have the right size tyre on? 130/70/18?
The NC24 has one of the lowest seat heights of all the 400 sports bikes.. feel likes im climbing a ladder when i get get on the ZXR..
I think you'd be looking at a chopper / cruiser if you wanted anything smaller.
Do you have the right size tyre on? 130/70/18?
The NC24 has one of the lowest seat heights of all the 400 sports bikes.. feel likes im climbing a ladder when i get get on the ZXR..
I think you'd be looking at a chopper / cruiser if you wanted anything smaller.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
neilg50
- Settled in member
- Posts: 2
- Joined: Sun Apr 18, 2010 8:49 pm
Re: Looking for a 17" wheel for NC24
OK thanks for your respective replies 