ok, took her out around the close again this evening but my speedo was not registering anything. i put her up on my abba stand and carefully fired her up and put her in gear. still no speed being registered even with a good revolution from the wheel.
i have checked the speedo cable - all fine, checking the haynes manual page 6.26 top picture in the middle, 14.2b shows a little white tab that i would believe sits on the sprocket bolt and then the cable connects to it and thus turns the cable.
i aint got one....?! but i have never looked in the past 12 months as she has been nowhere near being rideable let alone anything else so may not have been there when i bought her.
any idea on part number / availablity from anywhere?
nc30 front sprocket bolt - tab / pickup
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
pugparcels
- Site Supporter
- Posts: 367
- Joined: Wed Feb 25, 2009 5:17 pm
- Bike owned: nc30 & 929 fireblade
- Location: worcester - where the sauce comes from
-
wiplash
- Site Supporter
- Posts: 5
- Joined: Sun Jun 15, 2008 8:06 pm
- Bike owned: nc30
- Location: Belfast
Re: nc30 front sprocket bolt - tab / pickup
I got one off Rick Oliver for £8.50 delivered not long ago. Either pm him on here or drop him an email ricknc30@googlemail.com and he should get you sorted.
-
pugparcels
- Site Supporter
- Posts: 367
- Joined: Wed Feb 25, 2009 5:17 pm
- Bike owned: nc30 & 929 fireblade
- Location: worcester - where the sauce comes from
Re: nc30 front sprocket bolt - tab / pickup
cheers for that, im still adament there was not one on there when i had her, but in saying that there was very little on there when i had her!
hopefully that should getme sorted.
hopefully that should getme sorted.