Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
frank
- Settled in member
- Posts: 22
- Joined: Thu Nov 06, 2008 11:25 pm
- Location: Dublin
Post
by frank » Tue Feb 16, 2010 1:12 pm
Just wondering if anybody has changed the coolant in their SuperFour. I want to do mine as i have never done it since buying the bike. Im asuming its simple enough but any tips or potential pitfalls would be appreciated
Frank
-
Superjack44
- Familiar Member
- Posts: 272
- Joined: Sun Mar 08, 2009 8:52 pm
- Bike owned: 1CB400 SF 1 VFR800 1 Moto Guzz
- Location: Prudhoe Northumberland
Post
by Superjack44 » Tue Feb 16, 2010 6:03 pm
When I change mine I just removed the lower hose from the waterpump.
When you come to refill make sure the coolant is silicate free mix with distilled water 50/50 mix.
I used carplan antifreeze.
Might be an idea to flush out the system first while you are at it before filling with the correct coolant. Jack
-
Mansie
- Settled in member
- Posts: 100
- Joined: Thu May 08, 2008 10:19 am
- Bike owned: CB400 Four NC36, NT650V
- Location: Cambridgeshire
-
Contact:
Post
by Mansie » Tue Feb 16, 2010 10:16 pm
All good tips.
First take the cap of the coolant filler (on my bike that sits on the right behind the side cover).
Undo one of the nuts on the pump (the lowest) and the fluid squirts out. Flush the system a few times with water, even run the motor a bit. Make sure to clean out the overflow reservoir too.
Cheers, Mansie
-
frank
- Settled in member
- Posts: 22
- Joined: Thu Nov 06, 2008 11:25 pm
- Location: Dublin
Post
by frank » Wed Feb 17, 2010 2:55 pm
Thanks for the tips guys. Ill give it a go at the weekend and let you know how it turns out.
Frank.