Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Growler
- Settled in member
- Posts: 83
- Joined: Mon May 11, 2009 6:19 pm
- Location: Dundee, Scotland
-
Contact:
Post
by Growler » Thu Dec 17, 2009 6:43 am
Can anyone tell me what the spec of the instrument bulbs at the back of the rev counter are. One bulbs blown and I wondered if they are a general automotive instrument bulb or special Honda part? Nothing written on the bulb to even start a google search so any help would be good?
Cheers

-
alexwitham
- Site Supporter

- Posts: 1340
- Joined: Wed May 20, 2009 10:04 pm
- Bike owned: 675R, GSXR6, NC30
- Location: Norwich
Post
by alexwitham » Thu Dec 17, 2009 8:52 am
T5 286 is what you want.
-
Neosophist
- Moderators

- Posts: 8172
- Joined: Fri Jul 04, 2008 1:01 pm
- Bike owned: CBR954
Post
by Neosophist » Thu Dec 17, 2009 8:54 am
There 12v 1.7w bulbs.
The top and bottom ones in the speedo are 34908-MB9-871
All the others (7) are 34908-MG9-951
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
-
DanHam
- Settled in member
- Posts: 133
- Joined: Mon Jul 20, 2009 6:56 pm
Post
by DanHam » Thu Dec 17, 2009 1:43 pm
My temp gauge bulb has gone.
Can I get one of these 34908-MG9-951 from say Halfords or Demon Tweeks?
How many bulbs are in the temp gauge?
-
ibby4585
- Site Supporter

- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Post
by ibby4585 » Thu Dec 17, 2009 1:48 pm
yeah you should be able to get them from any car shop/ boyracer shop! they are a kind of wedge shape. with two electrode pieces of wire bent around the end of the bulb to make the connection. Only one bulb needed in the temp gauge. two in each of the of the others which are slightly bigger bulbs.
Kris
-
DanHam
- Settled in member
- Posts: 133
- Joined: Mon Jul 20, 2009 6:56 pm
Post
by DanHam » Thu Dec 17, 2009 2:13 pm
Cheers Ibby, so I could get it with just the code? rather than having to go an taking it all apart now to get the bulb and then putting it back together then taking it apart then putting the bulb in lol.
Because when I last went into Halfords to get a bulb for my TYGA kit, the lad just looked at it and shrugged his shoulders.
-
ibby4585
- Site Supporter

- Posts: 2315
- Joined: Tue Jun 16, 2009 1:42 pm
- Bike owned: SP's
- Location: oxfordshire
Post
by ibby4585 » Thu Dec 17, 2009 2:45 pm
You may well be able to get them by code. To be honest jap spec bikes are a bit of a minefield with regards to codes i think. You only need to take the nose cone off to get at them its very easy. Your side lights are pratically the same bulbs and you can get to them without taking anything off!!
-
Growler
- Settled in member
- Posts: 83
- Joined: Mon May 11, 2009 6:19 pm
- Location: Dundee, Scotland
-
Contact:
Post
by Growler » Thu Dec 17, 2009 3:44 pm
Cheers guys... gonna try and pick up a couple at the local motor factors before trying for original parts!!! Probably have to cancel Christmas for the price Mr Honda will want!
12v 1.7w was what I needed to know
