SEED graphics size help please
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 40
- Joined: Mon Oct 19, 2015 9:27 pm
- Bike owned: NC30 / 675SE
- Location: Wiltshire
SEED graphics size help please
Can anyone with a NC30 SEED measure the length of the force V4 decal at the front by the indicator please. I have bought a set of decals for my bike and spent half the afternoon trying to mask up ready for paint and nothing lines up. My best guess is that the force v4 decal is too big and that is putting all the lines out for the black area ( if that makes sense ). All the rest of the decals seem ok.
Many thanks
Many thanks
-
- Settled in member
- Reactions:
- Posts: 40
- Joined: Mon Oct 19, 2015 9:27 pm
- Bike owned: NC30 / 675SE
- Location: Wiltshire
Re: SEED graphics size help please
Well I got some more made by Image works at 100mm length, the others were approximately 135mm and all seems perfect now. The problem seemed to be that the larger ones are for a different model where the decal is lower down the panel allowing more room for it. So if your ordering some decals for a Seed check the size first.