How my bikes looking

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
cbrjack
Settled in member
Reactions:
Posts: 30
Joined: Sun Dec 06, 2009 7:39 pm
Bike owned: honda nc29
Location: 2 miles from cadwell park
Re: How my bikes looking

Post by cbrjack » Sun Dec 13, 2009 8:24 pm

just line up the sections like? sounds easy.... cheers mate :grin:

Craigb
Settled in member
Reactions:
Posts: 51
Joined: Tue Nov 10, 2009 3:06 pm
Bike owned: CBR 400 NC29 / Aprilia RS50
Location: runcorn
Re: How my bikes looking

Post by Craigb » Sun Dec 13, 2009 9:28 pm

yeah lol, just make sure the wheel is clean first.

Metelko
Settled in member
Reactions:
Posts: 39
Joined: Wed Sep 02, 2009 7:40 pm
Re: How my bikes looking

Post by Metelko » Fri Mar 05, 2010 8:26 pm

you said something about fitting a 600 side stand? Is it a straight swap or some fiddling about needed?

User avatar
ibby4585
Site Supporter
Site Supporter
Reactions:
Posts: 4776
Joined: Tue Jun 16, 2009 1:42 pm
Bike owned: SP's
Location: oxfordshire
Re: How my bikes looking

Post by ibby4585 » Fri Mar 05, 2010 8:30 pm

I like your block paved drive, was it expensive? toying with the idea getting my done!

User avatar
Polisher
Site Supporter
Site Supporter
Reactions:
Posts: 243
Joined: Mon Jun 22, 2009 5:20 pm
Bike owned: z1000a1h, vfr800vtec, nc30,
Location: Earby, North yorks
Re: How my bikes looking

Post by Polisher » Fri Mar 05, 2010 9:36 pm

If you buy the Motrax rim tape kit it comes with a little applicator that runs around the rim. It took me 2 mins and the spacing is perfect. I did both wheels on both sides without taking the wheels out in 20 minutes. The kits only cost £7.99 on fleabay

Image

Image
'Revenge is a dish best served cold........'


Post Reply