Fairings from China/Hong Kong

scotjell · Post by **scotjell** » Sun Jun 30, 2013 10:02 am

Like I say I sent them a message and still no reply so if that's the customer service not a good start. Asked them how many they would need to be ordered as it looks like they don't have a mould but if they do get back to me I'll let you know.

scotjell · Post by **scotjell** » Tue Jul 02, 2013 7:36 am

Just got this reply if anyone's numbers come up on the Euro Millions

Hello Scott

How are you?

Sorry for our late reply,

I am sorry to tell you that we haven't available injection moulded kits for your bike.

Create a injection fairing mould can cost at least 10 000€ per part, so a whole NC30 kit mould creation will cost around 80 000€. In terms of number of sales do not compensate to produce it. That is why on the market you just can find cheap and crappy chinese fairings.

Thank you,
Luis Lamarosa
www.superfairings.com

Post by **jim157** » Tue Jul 02, 2013 8:07 am

Oh well, that's a shame.

scotjell · Post by **scotjell** » Tue Jul 02, 2013 10:51 am

We'd need at least 120 for a bulk buy and it sounds like they are good with support.

talcumpowderbut · Post by **talcumpowderbut** » Wed Jul 03, 2013 7:01 pm

Heres mine fitted

scotjell · Post by **scotjell** » Wed Jul 03, 2013 7:12 pm

Are they Chinese? Which seller for future reference and what snags did you have if any? Looks good though especially the polished tank!!

talcumpowderbut · Post by **talcumpowderbut** » Wed Jul 03, 2013 7:25 pm

scotjell wrote:Are they Chinese? Which seller for future reference and what snags did you have if any? Looks good though especially the polished tank!!

They are chinese aye. i will update you with the name of the ebay seller (something like motofairings or similar). I have two problems with this set. the front headlight cowl sits at an angle facing up to the sky slightly so does not sit perfectly flush against the headlights. And also the light cowl and upper front panel dont hold on tight enough like previously mentioned in this thread but a couple zip ties sorted that out. For the price i dont have any complaints. cheers connor

talcumpowderbut · Post by **talcumpowderbut** » Wed Jul 03, 2013 7:32 pm

scotjell wrote:Are they Chinese? Which seller for future reference and what snags did you have if any? Looks good though especially the polished tank!!

bought them from this guy.

http://myworld.ebay.co.uk/needjustmotos ... TM:GB:1181

thebugser · Post by **thebugser** » Tue Aug 06, 2013 1:19 pm

Hi all
I got a HRC red/white/blue fairing from hong Kong but I have to paint the tank now. Does anyone know the RAL number or code for the red colour used on these fairings?
Bugser

Post by **jim157** » Tue Aug 06, 2013 5:19 pm

thebugser wrote:Hi all
I got a HRC red/white/blue fairing from hong Kong but I have to paint the tank now. Does anyone know the RAL number or code for the red colour used on these fairings?
Bugser

There's a paint code sticky in the General section:-
viewtopic.php?f=22&t=845

Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong

Re: Fairings from China/Hong Kong