HI guys,
I have put lan after market fairing set on my RVF now, but only want to put in one head light into it so will need to cut the fairing to fit.
How do I seperate the headlight unit so it is just one lamp there? or how is it done?
Any help would be great, as im running around with no lights on the front now :D
RVF Headlight
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
Psychosomatic88
- Site Supporter
- Posts: 233
- Joined: Fri May 16, 2008 10:39 pm
- Location: Lydney, Gloucestershire
RVF Headlight
Going on the internet is like owning a gun... Just point, click, then shit your pants waiting for the Police to turn up.
-
viper_biker
- Moderators
- Posts: 1798
- Joined: Sun Apr 06, 2008 11:25 am
- Bike owned: VFR400RR, CBR1000RR6
- Location: Belfast, Norn Iron
- Contact:
Re: RVF Headlight
If you PM tanuki, he'll help you. H did it recently on his own RVF.
Ducati 916, not worth a carrott
-
tanuki
- Site Supporter
- Posts: 1571
- Joined: Wed Apr 30, 2008 4:47 pm
- Bike owned: CCM404 SM, CBR4/6 in progress
- Location: Nottingham U.K
Re: RVF Headlight
I'm here...
What I did was this:
I just cut the old lens away with a soldering iron and a dremel, Speedy who has also done something similar chopped his light in 2 then made a blanking plate for the side that was now open.
The reason I did it this way is so that it still remains a sealed unit.
HTH
What I did was this:
I just cut the old lens away with a soldering iron and a dremel, Speedy who has also done something similar chopped his light in 2 then made a blanking plate for the side that was now open.
The reason I did it this way is so that it still remains a sealed unit.
HTH
-
Psychosomatic88
- Site Supporter
- Posts: 233
- Joined: Fri May 16, 2008 10:39 pm
- Location: Lydney, Gloucestershire
Re: RVF Headlight
Sh1t hot thanks guys so far,
I have got it in half, and taken it to work again today to get a perfect flat put on the open side, then just need to re seal it and create some mountings in the fairings :D
I have got it in half, and taken it to work again today to get a perfect flat put on the open side, then just need to re seal it and create some mountings in the fairings :D
Going on the internet is like owning a gun... Just point, click, then shit your pants waiting for the Police to turn up.