VFR/RVF were do you shift?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Spike16
Site Supporter
Site Supporter
Posts: 1670
Joined: Tue Apr 29, 2008 8:56 pm
Bike owned: NC30 Road, SV650 Race
Location: Hampshire, Wichester

VFR/RVF were do you shift?

Post by Spike16 » Fri May 29, 2009 3:25 pm

Just wondering were people change gear when their going 100%, be that on track or road as im not sure where i personally should be changing gear.

Personally on the road i usually change gear at about 11-12k if im going for it and 9-10 if im not fully comitted but on track i was reving the thing to about 13k before changing up, is this too high? and will it be harming the engine?

User avatar
CMSMJ1
Moderators
Moderators
Posts: 7152
Joined: Thu May 01, 2008 9:42 am
Bike owned: NC30-No9
Location: Chesterfield, United Kingdom

Re: VFR/RVF were do you shift?

Post by CMSMJ1 » Fri May 29, 2009 4:19 pm

On a straight I'll be looking for 13k and then clutchless shifting into the next gears.

Depends if I need the over rev in corners or not..but I am also scared of my engine dying too so I'll try my damndest not to hit the limiter...whch I also have reduced on the CDI to 14k to help with this paranoia

it will come to you man - you ride your bike and when you start racing you'll be pinging it around everywhere..you'll surely be concentrating on other stuff at the time :o ;)
IMPERATOR REX ANGLORUM

The V4 is the law..

NC30 - No9 - my old mate

User avatar
abrmoto
Moderators
Moderators
Posts: 728
Joined: Wed Apr 30, 2008 10:52 pm
Bike owned: RVFx5,SP1,MV F3,C90,Firestorm
Location: Wigan
Contact:

Re: VFR/RVF were do you shift?

Post by abrmoto » Fri May 29, 2009 4:36 pm

14750 on Scitsu Rev counter :shock: :whistle: :scare:

tanuki
Site Supporter
Site Supporter
Posts: 1571
Joined: Wed Apr 30, 2008 4:47 pm
Bike owned: CCM404 SM, CBR4/6 in progress
Location: Nottingham U.K

Re: VFR/RVF were do you shift?

Post by tanuki » Fri May 29, 2009 4:42 pm

get the bike on a Dyno this will tell you where you make your peak power at the top of the rev range and just after that point is where its optimum gear chaning time...

User avatar
Acid
Settled in member
Posts: 72
Joined: Tue Apr 29, 2008 9:55 pm
Bike owned: Rs125 Nc30 Cr500 Sm
Location: N.Ire
Contact:

Re: VFR/RVF were do you shift?

Post by Acid » Fri May 29, 2009 5:02 pm

Around 13,500 ish

User avatar
viper_biker
Moderators
Moderators
Posts: 1798
Joined: Sun Apr 06, 2008 11:25 am
Bike owned: VFR400RR, CBR1000RR6
Location: Belfast, Norn Iron
Contact:

Re: VFR/RVF were do you shift?

Post by viper_biker » Fri May 29, 2009 7:19 pm

At about 16k :scare: :mad:
Ducati 916, not worth a carrott

hunter
Site Supporter
Site Supporter
Posts: 1292
Joined: Thu Nov 20, 2008 1:09 pm

Re: VFR/RVF were do you shift?

Post by hunter » Fri May 29, 2009 10:31 pm

if i'm in top gear down a long strait i will look at the revs,other than that it's all about ears and
feel,listen to the motor sing,feel it through the handle bars,you will soon learn when to change gear,then the rest of them can :Ass:

Neosophist
Moderators
Moderators
Posts: 8172
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954

Re: VFR/RVF were do you shift?

Post by Neosophist » Sat May 30, 2009 12:01 am

14 / 14'500 rpm.

im just uploading a video onto youtube at the moment i just made going to tesco's. I give it a run thru 1/2/3 ;)

I'll post link when im done
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...

The Hamster
Settled in member
Posts: 235
Joined: Wed Apr 22, 2009 2:10 pm

Re: VFR/RVF were do you shift?

Post by The Hamster » Sat May 30, 2009 12:19 am

Town Riding I rarely get the revs up over 6'000rpm, maybe only in 1st gear. I basically do this to keep my fuel usage down and keep a bit more money in my pocket lol.

As for 'Out of Town' riding, I normally shift around 12-13'000rpm unless Im riding with my mates on there GSX-Rs in which case it will be 15'200rpm (ish) in an effort to stay with them. LOL

I can see that prolonged high revs can cause damage to the engine, but that doesnt mean you shouldnt be scared of hitting the top of the rev band as such. Unless its HRC Ignition-ed or aftermarket set-up then it will have a rev limit which is the point you should start worrying, not before. Obviously though, with peak RPM not bieng point of Peak Power, it isnt necassarily the best point to shift.

challymo
Site Supporter
Site Supporter
Posts: 138
Joined: Fri May 02, 2008 10:59 pm
Location: Shrewsbury

Re: VFR/RVF were do you shift?

Post by challymo » Sat May 30, 2009 1:17 am

When really going for it on the road I usually shift up when it feels right, like 12k if im coming up to a corner and use the mid-range a bit. nut usually in the twisties im shifting at about 10-11k. I'd imagine this would be slightly different for the track.

Post Reply