Page 4 of 27
Re: CBR400RR exhaust thread
Posted: Sun Sep 13, 2009 8:37 am
by mrdidlydingo
tanuki wrote:vr46 wrote:
I have a system that looks similar to this for my 29. It detaches into 3 sections, it has the bridged down pipes and is titanium.
Due to it having the bridged downpipes, does that mean it's likely to be a "Beet" system?
held together with springs? two spring holders to hold a slip on in place?
Yes sounds the same as mine...Beet.
Don't BEET systems have a clamp and not spring hooks ?
Re: CBR400RR exhaust thread
Posted: Sun Sep 13, 2009 9:48 am
by tanuki
Maybe for other models but the NC29 systems are sprung.
Re: CBR400RR exhaust thread
Posted: Sun Sep 13, 2009 4:37 pm
by GF Racing
All the Beet systems I have bought new are NOT sprung but free fitting / bolt together.
Re: CBR400RR exhaust thread
Posted: Sun Sep 13, 2009 5:55 pm
by tanuki
Well there you go, they do both types all of the nc29 ones I have seen are sprung I guess it must number around 7 or 8 in total including mine most of them Ti though mine is steel.
Re: CBR400RR exhaust thread
Posted: Sun Sep 13, 2009 5:57 pm
by chrisja2
The one i have isnt sprung either Billy.
Chris.
Re: CBR400RR exhaust thread
Posted: Mon Sep 14, 2009 10:34 am
by Cammo
Mikiboy wrote:I have a full ally system for a 23. Looks like the Dic but seem to remember it being a Daishin. It's definately not the "banana".
Miki: pretty sure Daishin make the 'dic' branded mufflers, so they're one and the same company.
Re: CBR400RR exhaust thread
Posted: Fri Nov 13, 2009 8:14 am
by chrisja2
Any ideas on this one?
Chris.
Re: CBR400RR exhaust thread
Posted: Fri Nov 13, 2009 9:10 pm
by ROCK
does anyone know where I can any of these systems for my nc23?
Re: CBR400RR exhaust thread
Posted: Sat Nov 14, 2009 5:42 am
by GF Racing
We make road and race systems for the CBR400 - all as used on our Championship winning bikes.
See this thread: http://www.400greybike.info/newforum/vi ... 28&t=13099" onclick="window.open(this.href);return false;
BTW - we have plenty of new heavy duty Japanese made finned reg units in stock - £60 each inc. VAT
Add £4 for UK 1st class recorded delivery / packing.
Paypal is fine as per signature email below
Feel free to email or call ...
Cheers
Re: CBR400RR exhaust thread
Posted: Sat Nov 21, 2009 12:12 pm
by Yakama
Just received this in the post today from japan for my NC23. Not sure if it is genuine HRC as the end can simply has a sticker on it but it still looks sweet and is very light. Hope it sounds as good as it looks.
