CBR400RR exhaust thread
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Senior Member
- Reactions:
- Posts: 1244
- Joined: Tue Apr 29, 2008 10:01 pm
- Bike owned: Already 20% of NC29...
- Location: Seattle, USA
- Contact:
Re: CBR400RR exhaust thread
BEET titanium based of the color I think.vr46 wrote:Yep, but what about the system? You can't tell by the poor photo, but the exhaust system is sprung and the rear link pipe is much higher than standard.
-
- Site Supporter
- Reactions:
- Posts: 583
- Joined: Sun Jun 15, 2008 1:42 pm
- Bike owned: All sorts
- Location: CUMBRIA
Re: CBR400RR exhaust thread
Nope, a Beet system hangs lower. I've found photos of the same exhaust on here :
Edit: It looks like a matched can / system; The end can bolts on perfectly - no surplus edges.
Edit: It looks like a matched can / system; The end can bolts on perfectly - no surplus edges.
Last edited by vr46 on Mon May 28, 2012 6:31 pm, edited 1 time in total.
Skint Novice F400
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: CBR400RR exhaust thread
It could be a moriwaki system as they did do full systems with that end can or it could be a yoshimura system as they had balancer pipes too.
When I get home I will post up pics of each so you can compare them
When I get home I will post up pics of each so you can compare them
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: CBR400RR exhaust thread
Ok so the yoshimura system:
But I now dont think it is this
But I now dont think it is this
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: CBR400RR exhaust thread
So I think it is a full moriwaki system like this:
-
- Site Supporter
- Reactions:
- Posts: 583
- Joined: Sun Jun 15, 2008 1:42 pm
- Bike owned: All sorts
- Location: CUMBRIA
Re: CBR400RR exhaust thread
Thanks Yakama!
That looks like the one, even the Hanger bracket is the same.
That looks like the one, even the Hanger bracket is the same.
Skint Novice F400
- Yakama
- Site Supporter
- Reactions:
- Posts: 2676
- Joined: Wed Apr 30, 2008 5:27 pm
- Bike owned: NC23s, 29, 30s, MC16
- Location: Oban
Re: CBR400RR exhaust thread
You thinking of buying the system or the bike?
-
- Settled in member
- Reactions:
- Posts: 5
- Joined: Wed Jun 29, 2011 3:06 pm
Re: CBR400RR exhaust thread
Hey guys, got this system nearly two years but finally getting around to rebuilding the bike.
The ebay ad said "...NC29 Moriwaki Titanium race exhaust", it came in 7 pieces (8 including an additional link pipe made from stainless, not pictured)
Any idea what it is? The reason for the odd colour is thats its just been sand blasted, not sure if it is Titanium but its super light weight.
IMG_1246 by Joe Alner, on Flickr
IMG_1247 by Joe Alner, on Flickr
IMG_1248 by Joe Alner, on Flickr
Cheers!
The ebay ad said "...NC29 Moriwaki Titanium race exhaust", it came in 7 pieces (8 including an additional link pipe made from stainless, not pictured)
Any idea what it is? The reason for the odd colour is thats its just been sand blasted, not sure if it is Titanium but its super light weight.
IMG_1246 by Joe Alner, on Flickr
IMG_1247 by Joe Alner, on Flickr
IMG_1248 by Joe Alner, on Flickr
Cheers!
-
- Settled in member
- Reactions:
- Posts: 161
- Joined: Mon Jun 18, 2012 6:51 pm
- Bike owned: NC30, R1, CB250RS, FZR400
- Location: North Yorkshire UK
Re: CBR400RR exhaust thread
Hi all just a quick question about the GF racing nc23 exhaust slip on adapter. Does it just fit direct onto the original exhaust flange or do i need to cut off the flange down to the bolt face? If that makes sense!
Sorry if this is a bit obvious but wanted to double check before hacking away!
Sorry if this is a bit obvious but wanted to double check before hacking away!
-
- Site Supporter
- Reactions:
- Posts: 155
- Joined: Fri Feb 04, 2011 4:35 pm
- Bike owned: 3tjrrsp/NC29/998R/rc30 750 rep
- Location: Cornwall/Berkshire
Re: CBR400RR exhaust thread
Yakama wrote:Here is my nc29 hrc system:
Blimey!!! so thats a hrc one for deffo then?? Have identical one sat here...was never sure on make