Page 1 of 27

CBR400RR exhaust thread

Posted: Thu May 28, 2009 12:12 am
by PARUS
I think this is time to start this topic. BTW VFR's guys already have one..

I'm thinking to buy following, it's lighter. Price is up to 350$ with P&P from Japan.
What you say guys ?

Image

Re: CBR400RR exhaust thread

Posted: Thu May 28, 2009 10:16 am
by garyboy_palaboy
you dont need that........









...give them to me!!!! :twisted:

Re: CBR400RR exhaust thread

Posted: Thu May 28, 2009 12:39 pm
by greggo
Looks the same as mine Parus, but with a different end can. I'll get a piccie up at the weekend

Will have a dyno read out soon. That exhaust is particularly good if you want to squeeze in a bigger radiator (I use one from a '99 R1 - it's basically flat with no curve) without the worry of the front wheel hitting it under brakes.

Re: CBR400RR exhaust thread

Posted: Thu May 28, 2009 5:12 pm
by domski
I've just bought this 'JMCA Factory Full System' from the USA...

Image

Image

Image

Image

Re: CBR400RR exhaust thread

Posted: Thu May 28, 2009 10:26 pm
by PARUS
Just interesting. Are this heat wrap really work?

Re: CBR400RR exhaust thread

Posted: Thu May 28, 2009 10:31 pm
by domski
I'm not sure it's much use where it is at the moment, but I'm no expert.

I think it would be more effective if it was up on the headers.

Maybe I can do some tests on a dyno - I will let you know the results ;)

Re: CBR400RR exhaust thread

Posted: Thu May 28, 2009 11:28 pm
by tanuki
you know JMCA is not a brand but is the japanese equivelent of our British standard, in other words it just means that it meets jap noise regs.

Looks like a quality system though the way the headers sit so close to the engine is what my Beet racing system misses a bit like the HRC system which yours defo isn't but the one Parus says he is thinking about buying could well be.
I'll try to get some pics of the Beet system up soon

Re: CBR400RR exhaust thread

Posted: Fri May 29, 2009 12:48 am
by greggo
Tanuki is right, as far as I know the system Parus is looking at is either an HRC system, or a copy of an HRC system.

Mine looks identical and is made by TSR, although I have a longer endcan.

These systems are relatively good for midrange, handy when racing against VFR's as they don't get a jump in the initial phase off the turn before the in line 4 gets wound up...

Re: CBR400RR exhaust thread

Posted: Fri May 29, 2009 11:05 pm
by domski
tanuki wrote:you know JMCA is not a brand but is the japanese equivelent of our British standard, in other words it just means that it meets jap noise regs.
I didn't know that actually :oops:

The advert said...

* JMCA Factory Full System Race Exhaust *
Factory team race full system, for all NC29 CBR400's. Serial number 00715064. Wish I could tell you more, but all the literature is in Japanese! Was on our track bike for one weekend, and has been sitting on the shelf for the past 15 years. Absolutely excellent condition! No rash, no damage, no rust.

:?:

Re: CBR400RR exhaust thread

Posted: Sun Jul 26, 2009 9:07 am
by PARUS
Just decided little bit refresh topic.

DIC Exhaust System
Image
Image
Image

EX (Endurance) Exhaust System
Image
Image
Image

DAISHIN RACING Exhaust System
Image
Image