Are the nc30 uk/Europe spec nose cones different to the JDM spec ones I know there is an oil cooler but is the fitment to the mid panels and the mirror stay different or ex acutely the same
Thanks
Pete

yes they are. as stated in the original post
mountings are all the same, so mids clip on the same way as do the mirrors. but it fouls the oil cooler and indicators wont fit obviously.

I know this is an old post , but maybe you can help me, can I remove the cooler and just block the pipe fitting holes without effecting the oil flow around the rest of the engine. The cooler is fine but i am concerned about all the extra pipe work and the cooler getting a leak bouncing around the TT course where blocked holes cannot .
Your thoughts.

yes you can just link them together.

oil coole rnot likely to leak from racing though unless you have already damaged the pipes.

never seen one leak before, the one on my 24 survived a few track offs without any leaks

thanks for this
ive contacted Honda UK, Honda Europe and Honda Japan (who have all been really helpful) but sadly they dont have any records for bikes of this age to identify where they were made for / sold