NC35 Swingarm Socket Tool

[RVFmal]

Need to have one made up as few sellers on eBay or otherwise ship to South Africa (and even those that do, the shipping costs are, let's just say, eye-watering)

Does anyone have any insight as to the dimesions of the tool (apart from the 1/2" drive dimensions of the socket)

[Foxy400]

My first port of call would be to check with Rick Oliver. Have a look at his website and if necessary give him a call. If he doesn't have what you want I'm sure he will be able to point you in the right direction.
Failing that I would try Andrew Pocock, who has taken over the website of Graeme France Racing, and supplies NC35 parts and services. I'll PM you their respective numbers.

[RVFmal]

My first port of call would be to check with Rick Oliver. Have a look at his website and if necessary give him a call. If he doesn't have what you want I'm sure he will be able to point you in the right direction.
Failing that I would try Andrew Pocock, who has taken over the website of Graeme France Racing, and supplies NC35 parts and services. I'll PM you their respective numbers.

Thanks @Foxy400

Have asked Rick a few questions privately, but don't want to inundate him with queries.

Going to have a tool made up locally as the shipping costs to South Africa for single items such as this tool is just prohibitive.

Will add Andrew to my list of parts for the NC35 for future reference too, thank you.

As an aside, from what I have gleaned, the tool dimensions are:

OD 38mm
ID 30mm
Tooth Depth 5mm
Tooth Width 10mm