Nc30 side stand
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 30
- Joined: Wed Nov 14, 2018 6:37 pm
Nc30 side stand
I’ve just fitted the rubber to the side stand as it was missing. I have a couple of questions
1 which way does it fit into the stand
2 which way does it bend when bike is on side stand (forwards or backwards)
1 which way does it fit into the stand
2 which way does it bend when bike is on side stand (forwards or backwards)
-
- Senior Member
- Reactions:
- Posts: 1351
- Joined: Fri Feb 21, 2014 1:31 pm
Re: Nc30 side stand
I think it points forward as it's meant to catch if left down??so would then flip up...
- NGneer
- Site Supporter
- Reactions:
- Posts: 1349
- Joined: Wed Jan 21, 2009 7:37 am
- Bike owned: x3 NC30,Matchless G80s AJS16ms
- Location: Köln
Re: Nc30 side stand
Batchelor: There is an arrow on the rubber which wants to be on the outside face (when the stand is down) and the angle of the bottom of the rubber will naturally make the rubber bend BACKWARDS when you put the stand down. It is true this was due there being no side stand cut out Switch on the NC30 and the rubber foot was there (in theory) to flick the side stand up if you left it down, before it dug into the deck and spat you off.
-
- Settled in member
- Reactions:
- Posts: 30
- Joined: Wed Nov 14, 2018 6:37 pm
Re: Nc30 side stand
NGneer wrote: ↑Thu Oct 17, 2019 9:22 amBatchelor: There is an arrow on the rubber which wants to be on the outside face (when the stand is down) and the angle of the bottom of the rubber will naturally make the rubber bend BACKWARDS when you put the stand down. It is true this was due there being no side stand cut out Switch on the NC30 and the rubber foot was there (in theory) to flick the side stand up if you left it down, before it dug into the deck and spat you off.
Cheers for the information and pics. That’s a very clean bike.
- NGneer
- Site Supporter
- Reactions:
- Posts: 1349
- Joined: Wed Jan 21, 2009 7:37 am
- Bike owned: x3 NC30,Matchless G80s AJS16ms
- Location: Köln
Re: Nc30 side stand
No problem, and thanks.
It ended up as my Honda Britain but was just the only one I had with a clear picture of the side stand rubber fitted
Build thread here if you are bored , viewtopic.php?f=62&t=54015
-
- Settled in member
- Reactions:
- Posts: 30
- Joined: Wed Nov 14, 2018 6:37 pm
Re: Nc30 side stand
That killed some time on a night shift. Nice speedo!NGneer wrote: ↑Sat Oct 19, 2019 10:34 amNo problem, and thanks.
It ended up as my Honda Britain but was just the only one I had with a clear picture of the side stand rubber fitted
Build thread here if you are bored , viewtopic.php?f=62&t=54015