Page 3 of 4
Re: NC35 Ram Air Setup
Posted: Sat Sep 01, 2018 1:25 am
by RoninZX-10R
How did your bike run at Broadford yesterday?
Re: NC35 Ram Air Setup
Posted: Sun Sep 02, 2018 8:30 am
by SPOONDIDDLY
It got called off due to the weather, so will be taking it this coming saturday instead
Re: NC35 Ram Air Setup
Posted: Mon Sep 03, 2018 2:50 am
by RoninZX-10R
This coming weekend is looking a bit more promising, fingers crossed.
Re: NC35 Ram Air Setup
Posted: Mon Sep 10, 2018 10:45 pm
by RoninZX-10R
Any luck at the trackday Saturday?
Re: NC35 Ram Air Setup
Posted: Tue Sep 11, 2018 11:35 am
by SPOONDIDDLY
Saturday went very well - the weather was perfect and the bike felt great.
The power delivery was very linear with no dips or flat spots.
I think that it might be running a bit rich however, which meant that it didn't feel as powerful as it should have, so I'm going to swap the 150 mains for 140's and so how that goes.
I'll have to wait and see how it goes once it's dialled in to provide a proper review.
Re: NC35 Ram Air Setup
Posted: Tue Sep 11, 2018 9:56 pm
by RoninZX-10R
Sounds promising. Hopefully once the smaller jets are installed it'll be running perfect.
Re: NC35 Ram Air Setup
Posted: Fri Sep 14, 2018 1:50 pm
by saltysealion
Did you get your bike dyno tuned at the shop?
Re: NC35 Ram Air Setup
Posted: Sat Sep 15, 2018 8:26 am
by SPOONDIDDLY
saltysealion wrote: ↑Fri Sep 14, 2018 1:50 pm
Did you get your bike dyno tuned at the shop?
The shops interstate so couldn't get the bike dyno'd there. I will be aiming to get it dyno'd locally in the near future, however there is a number of other things that I need to do to the bike first, so it'll be some time before I take it to the dyno.
Re: NC35 Ram Air Setup
Posted: Sat Sep 15, 2018 8:58 am
by SPOONDIDDLY
Re: NC35 Ram Air Setup
Posted: Sat Sep 15, 2018 11:11 am
by Suzuki416
Really dumb question. Shouldn't the gold reflective be on the engine side of the tray ? Then it keeps the engine temps away from the carbs