NC30/35 starter gear picture

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
smithyrc30
Settled in member
Reactions:
Posts: 11
Joined: Mon Sep 07, 2009 10:08 am
NC30/35 starter gear picture

Post by smithyrc30 » Fri Apr 06, 2018 12:58 am

Does anyone have or can anyone help with a picture of the starter gear (to part with the ignition pulse spikes on) please?

Need to confirm the number and spacing of the spikes for a project.

Thanks in advance.

magg
Senior Member
Reactions:
Posts: 1910
Joined: Mon Sep 20, 2010 11:55 pm
Bike owned: VFR400
Location: Blue Mountain NSW Australia
Re: NC30/35 starter gear picture

Post by magg » Fri Apr 06, 2018 2:16 am

As nc30 part number is different to that of nc35, cannot comment on nc35, but nc30 has 7 bumps spaced at 45 degrees ie one is missing.

User avatar
RickOliver
Site Supporter
Site Supporter
Reactions:
Posts: 536
Joined: Sun May 11, 2008 8:55 am
Re: NC30/35 starter gear picture

Post by RickOliver » Thu May 10, 2018 11:27 pm

NC35 trigger rotor has nine pips at 36 degree spacing and one gap...


Post Reply