NC35/30 rear sprocket

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
saltysealion
Settled in member
Reactions:
Posts: 51
Joined: Tue Oct 27, 2015 6:45 am
NC35/30 rear sprocket

Post by saltysealion » Tue Jan 23, 2018 11:48 pm

I know the stock teeth count is different but are the dimensions/fitting the same?

IE, can I order a NC30 525 sprocket and slap it onto a NC35?

Some webpages just don't list a NC35, but they do for the NC30..

SPOONDIDDLY
Settled in member
Reactions:
Posts: 85
Joined: Thu Mar 20, 2014 9:05 pm
Re: NC35/30 rear sprocket

Post by SPOONDIDDLY » Wed Jan 24, 2018 8:49 am

Yes, they are the same

hunter
Site Supporter
Site Supporter
Reactions:
Posts: 2141
Joined: Thu Nov 20, 2008 1:09 pm
Re: NC35/30 rear sprocket

Post by hunter » Thu Jan 25, 2018 10:44 pm

Yep same.

saltysealion
Settled in member
Reactions:
Posts: 51
Joined: Tue Oct 27, 2015 6:45 am
Re: NC35/30 rear sprocket

Post by saltysealion » Sun Jan 28, 2018 1:01 pm

Thanks, helps a lot with some sites that list VRF but not RVF.

I can easily request 38Ting to stay stock :)

User avatar
JZH
Site Supporter
Site Supporter
Reactions:
Posts: 368
Joined: Mon Oct 27, 2008 7:02 pm
Bike owned: RSCBRRVFVFRST
Location: London, UK/So.Cal., USA
Contact:
Re: NC35/30 rear sprocket

Post by JZH » Sat Feb 03, 2018 2:40 pm

Same as RC30, innit? The sprocket carriers are the same, bar the colour.

Ciao,
JZH

London, UK/So.Cal., USA
www.vsource.org

User avatar
RickOliver
Site Supporter
Site Supporter
Reactions:
Posts: 536
Joined: Sun May 11, 2008 8:55 am
Re: NC35/30 rear sprocket

Post by RickOliver » Thu May 10, 2018 11:31 pm

Yes, the NC30, NC35 & RC30 all use the same rear sprocket - take note that if you are fitting a 525 sprocket the machined recess faces inwards, not outwards i.e. unlike most bikes the sprocket is offset towards the wheel, not away...

Rick

saltysealion
Settled in member
Reactions:
Posts: 51
Joined: Tue Oct 27, 2015 6:45 am
Re: NC35/30 rear sprocket

Post by saltysealion » Sun May 13, 2018 2:19 pm

Hi Rick,

I'm a little confused.
One side is flush flat, the otherside has a ring protruding. Are you saying that the flush side should be on the outside?

User avatar
NGneer
Site Supporter
Site Supporter
Reactions:
Posts: 1349
Joined: Wed Jan 21, 2009 7:37 am
Bike owned: x3 NC30,Matchless G80s AJS16ms
Location: Köln
Re: NC35/30 rear sprocket

Post by NGneer » Tue May 15, 2018 10:40 am

saltysealion wrote:
Sun May 13, 2018 2:19 pm
Hi Rick,

I'm a little confused.
One side is flush flat, the otherside has a ring protruding. Are you saying that the flush side should be on the outside?
Saltysealion - Yup that is exactly what he is saying Flat side of the sprocket facing outwards - ie to the left as you are sat on the bike :grin:
Now you know this you will see loads fitted the wrong way around, but obviously it doesn't seem to cause any great issues.

:rocks:

saltysealion
Settled in member
Reactions:
Posts: 51
Joined: Tue Oct 27, 2015 6:45 am
Re: NC35/30 rear sprocket

Post by saltysealion » Tue May 15, 2018 3:49 pm

WOW, thank you so much. I was about to install it on the wrong way!

User avatar
NGneer
Site Supporter
Site Supporter
Reactions:
Posts: 1349
Joined: Wed Jan 21, 2009 7:37 am
Bike owned: x3 NC30,Matchless G80s AJS16ms
Location: Köln
Re: NC35/30 rear sprocket

Post by NGneer » Wed May 16, 2018 8:34 am

saltysealion wrote:
Tue May 15, 2018 3:49 pm
WOW, thank you so much. I was about to install it on the wrong way!
Easily done and instinctively you would think it should go the other way around.
Once you know you will see so many fitted the wrong way around but without any major issues that I am aware of, so can't be too much of an issue ;)


Post Reply