Abba for the NC35
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
saltysealion
- Settled in member
- Reactions:
- Posts: 51
- Joined: Tue Oct 27, 2015 6:45 am
Abba for the NC35
Hi all,
I have an abba stand and I just can't work out how to get it going.
I bought it with a NC35 adapter kit, but no matter the combination, I cannot find anything that can work with the bolt on the RHS of the bike. As part of the kit, there comes a bolt with a circular pin on it, but it just doesn't fit as the bike has a hex bolt on it?
I have the 19 kit, and it feels like it's the wrong kit. If anyone can shed some light on this it would be great.
I have an abba stand and I just can't work out how to get it going.
I bought it with a NC35 adapter kit, but no matter the combination, I cannot find anything that can work with the bolt on the RHS of the bike. As part of the kit, there comes a bolt with a circular pin on it, but it just doesn't fit as the bike has a hex bolt on it?
I have the 19 kit, and it feels like it's the wrong kit. If anyone can shed some light on this it would be great.
-
Dynamohum
- Site Supporter
- Reactions:
- Posts: 1391
- Joined: Sun May 04, 2008 9:07 am
- Location: glasgow
Re: Abba for the NC35
The small pin adaptor on the right side fits into the inside of the hole in the swinging arm nut/spindle there should be a cup on the stand which this pin sits in.