What to do with it?

Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Post Reply
TURK122
Settled in member
Reactions:
Posts: 147
Joined: Mon Jun 15, 2015 2:00 pm
Location: Hull
What to do with it?

Post by TURK122 » Sun May 28, 2017 5:09 pm

Picked this up from ebay last week.
It's been messed with but it does had the v5.
No engine or loom or clocks. Fairing is I right miss match and the subframe is all wrong,
But the tank is solid. All the bearings will probably need replacing but it's a good basis for a complete built from the ground up project (long term project). Image

Sent from my SM-N910F using Tapatalk
Top
Dynamohum
Site Supporter
Site Supporter
Reactions:
Posts: 1391
Joined: Sun May 04, 2008 9:07 am
Location: glasgow
Re: What to do with it?

Post by Dynamohum » Sun May 28, 2017 6:25 pm

Theres not a lot to being got on with there unless you can source a motor loom etc cheaply and you already have some of the other parts could be an expensive challenge when finished.
Top
TURK122
Settled in member
Reactions:
Posts: 147
Joined: Mon Jun 15, 2015 2:00 pm
Location: Hull
Re: What to do with it?

Post by TURK122 » Sun May 28, 2017 8:19 pm

Also got these bits with it as well.
Image

Sent from my SM-N910F using Tapatalk
Top
vic-vtrvfr
Site Supporter
Site Supporter
Reactions:
Posts: 905
Joined: Tue Feb 14, 2012 9:12 pm
Bike owned: NC30 x4, VTR1000 Firestorm
Location: Co Down
Re: What to do with it?

Post by vic-vtrvfr » Sun May 28, 2017 10:45 pm

Subframe looks like could for a tyga seat unit
Top
TURK122
Settled in member
Reactions:
Posts: 147
Joined: Mon Jun 15, 2015 2:00 pm
Location: Hull
Re: What to do with it?

Post by TURK122 » Mon May 29, 2017 6:33 am

Don't know what it's off but it's for zxr rear fairing. Anyway it's definitely not staying.

Sent from my SM-N910F using Tapatalk
Top
richyrd5
Senior Member
Reactions:
Posts: 1351
Joined: Fri Feb 21, 2014 1:31 pm
Re: What to do with it?

Post by richyrd5 » Mon May 29, 2017 8:00 am

If they're standard bar ends and front wheel Is straight id be interested in those if you decide to break!
Top
TURK122
Settled in member
Reactions:
Posts: 147
Joined: Mon Jun 15, 2015 2:00 pm
Location: Hull
Re: What to do with it?

Post by TURK122 » Mon May 29, 2017 9:54 am

What's withe the bar ends? Your the 2nd person to ask.
I'm keeping it for a project bike. It's going to have a different engine in but not surewhat yet.


Sent from my SM-N910F using Tapatalk
Top
richyrd5
Senior Member
Reactions:
Posts: 1351
Joined: Fri Feb 21, 2014 1:31 pm
Re: What to do with it?

Post by richyrd5 » Wed May 31, 2017 6:12 pm

Lol...I was going to get them for the guy who probably asked first(redmazda?).....
Top
Morespeedvicar
Site Supporter
Site Supporter
Reactions:
Posts: 1269
Joined: Thu May 01, 2008 1:37 am
Bike owned: Fzr400, NC30, CB50J, SS50Z KLR
Location: Grimsby
Re: What to do with it?

Post by Morespeedvicar » Sat Jun 03, 2017 12:14 am

How about an er6 engine or something?
Top
Neosophist
Moderators
Moderators
Reactions:
Posts: 9358
Joined: Fri Jul 04, 2008 1:01 pm
Bike owned: CBR954
Re: What to do with it?

Post by Neosophist » Sun Jun 04, 2017 12:46 pm

wow, i've cut up and thrown better stuff than that!

Erm.. any ideas so far?

Could take time and rebuild a nice bike but that will cost way more than just buying a good condition one.

You could build something crazy and one off... fireblade engien? vfr1200 engien? :D

who knows.
xivlia wrote:i dont go fast on this bike so really do not need a rear brake.. /
vic-vtrvfr wrote:Ask xivlia for help, he's tackled just about every problem u could think of...
Top
Post Reply

Return to “Honda - General”