Nc30 Uk and Jap models carb
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Settled in member
- Reactions:
- Posts: 7
- Joined: Tue Jan 24, 2017 8:22 pm
- Bike owned: Honda NC30
- Location: Kidderminster
Nc30 Uk and Jap models carb
Hi guys I Can you help me with something.
My nc30 is a 1992 VFR-L/N model and the carbs run 115 jets at the front two pots and 118 jets at the back two pots. But because I am 19 years old the bike has to be restricted to 46.6bhp by putting restricting washers in the inlet manafold. The U.K. Model carbs runs 122 jets at the front two pots and 120 jets at the back two. Would the bike run right with the U.K. Model jets.
Sent from my iPad using Tapatalk
My nc30 is a 1992 VFR-L/N model and the carbs run 115 jets at the front two pots and 118 jets at the back two pots. But because I am 19 years old the bike has to be restricted to 46.6bhp by putting restricting washers in the inlet manafold. The U.K. Model carbs runs 122 jets at the front two pots and 120 jets at the back two. Would the bike run right with the U.K. Model jets.
Sent from my iPad using Tapatalk
-
- Settled in member
- Reactions:
- Posts: 72
- Joined: Mon Aug 24, 2015 4:55 pm
- Bike owned: NC30 type1 MC18 red MC18 blue
Re: Nc30 Uk and Jap models carb
I think putting bigger jets in would make it run worse, if you have the restrictors in place. The only way to find out what it needs to run properly is to put it on a dyno and have it set up.