Front Axles: NC-30, NC-35, CBR600F-2/F-3, etc.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
-
- Familiar Member
- Reactions:
- Posts: 311
- Joined: Thu May 29, 2008 5:58 am
- Bike owned: VTR-250, VFR400RR,
- Location: Santa Clara County, California, USA
- Contact:
Front Axles: NC-30, NC-35, CBR600F-2/F-3, etc.
Hi All:
I am making Titanium Axles for the NCs. A long time ago, I compared the NC-30, NC-35, CBR600F-2/3 and a few other bikes to find the only dimensions that were different were the lengths. Here is a link to the drawing that I will be making the axles off. Can any of you, or several of you, check out my drawing and compare the measurements to your front axles (NC-30 & NC-35) to make sure I am on the right track before I cut lots of expensive Titanium rod?
https://www.dropbox.com/s/iav7dk6rozbxp ... 3.pdf?dl=0
I look forward to the feedback.
Mike Norman
G-Force Engine Development
www.mngforce.com
There is no such thing as "Too Fast"
I am making Titanium Axles for the NCs. A long time ago, I compared the NC-30, NC-35, CBR600F-2/3 and a few other bikes to find the only dimensions that were different were the lengths. Here is a link to the drawing that I will be making the axles off. Can any of you, or several of you, check out my drawing and compare the measurements to your front axles (NC-30 & NC-35) to make sure I am on the right track before I cut lots of expensive Titanium rod?
https://www.dropbox.com/s/iav7dk6rozbxp ... 3.pdf?dl=0
I look forward to the feedback.
Mike Norman
G-Force Engine Development
www.mngforce.com
There is no such thing as "Too Fast"
- jetblack
- Site Supporter
- Reactions:
- Posts: 804
- Joined: Sat Apr 24, 2010 5:21 pm
- Bike owned: '89 NC30 SEED
- Location: Nottingham
Re: Front Axles: NC-30, NC-35, CBR600F-2/F-3, etc.
How much these gonna be?
Can measure mine later this week.
Can measure mine later this week.
It don't matter if i'm fixin' it or ridin' it.
xivlia wrote:sorry about that whole thing jetblack, i just got confused about the whole thing, and i didnt mean any disrespect to you.
- Tim400GB
- Site Supporter
- Reactions:
- Posts: 1168
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
Re: Front Axles: NC-30, NC-35, CBR600F-2/F-3, etc.
Hi Mike,
Ive been looking into an endurance type front wheel spindle.
viewtopic.php?f=22&t=52965
Have been speaking to Rick Oliver about it, would it be something you'd like to be in on?
Cheers
Tim
Ive been looking into an endurance type front wheel spindle.
viewtopic.php?f=22&t=52965
Have been speaking to Rick Oliver about it, would it be something you'd like to be in on?
Cheers
Tim
- violetpop
- Settled in member
- Reactions:
- Posts: 12
- Joined: Sun Oct 26, 2014 10:55 am
- Contact:
Re: Front Axles: NC-30, NC-35, CBR600F-2/F-3, etc.
I'd be very interested in this, please put me down for one.
Sent from my SM-G935F using Tapatalk
Sent from my SM-G935F using Tapatalk