The weight list.
Forum rules
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
Please can you post items for sale or wanted in the correct For Sale section. Items / bikes for sale here will be removed without warning. Reasons for this are in the FAQ. Thanks
- superlite
- Site Supporter
- Reactions:
- Posts: 810
- Joined: Wed Apr 30, 2008 11:52 pm
- Bike owned: TLS, LB80 x 2
- Location: Australia
- Contact:
Re: The weight list.
L.Svedberg wrote:HRC Honda RS250 Works rear axle, including both nuts and wheel spacer 945 g. Std axle 1925 g.
'Take it to the Back'
- Tim400GB
- Site Supporter
- Reactions:
- Posts: 1168
- Joined: Mon Jan 04, 2010 7:24 pm
- Bike owned: 1 x NC30, 2 x NC32.5,
- Location: SE Greater London
Re: The weight list.
modified Fireblade ohlins maybe?rallykay wrote:Does anyone know from what bike the 2000 gr ohlin came from?
Will try and get my one weighed soon
- Cammo
- Site Supporter
- Reactions:
- Posts: 5524
- Joined: Thu May 01, 2008 12:35 am
- Bike owned: NC30
- Location: Melbourne, Australia
Re: The weight list.
I think the weight will be relative to the model of shock. I would presume that each model gets lighter than the last.Timon wrote:modified Fireblade ohlins maybe?rallykay wrote:Does anyone know from what bike the 2000 gr ohlin came from?
The ohlins TTX series will probably be the lightest available to the masses.
"It's just a ride" Bill Hicks
-
- Site Supporter
- Reactions:
- Posts: 581
- Joined: Tue Aug 16, 2011 3:10 pm
- Bike owned: MC22, 3TJ1
- Location: Thailand
- Contact:
Re: The weight list.
How about the frame and the swingarm? I know that it is assumed that one would never want to change these but I beg to differ.
-
- Senior Member
- Reactions:
- Posts: 1059
- Joined: Sun May 18, 2008 4:51 pm
- Bike owned: CB-1, MSX125
- Location: Gibraltar
Re: The weight list.
The swingarms are heavy, not to mention the weight of the axles and eccentric hub.maelstrom wrote:How about the frame and the swingarm? I know that it is assumed that one would never want to change these but I beg to differ.
There was one fella on here used an aprilia swingarm, I think? Took lots of work of course. Looked aces.
- micpec
- Site Supporter
- Reactions:
- Posts: 2138
- Joined: Sat May 03, 2008 9:11 pm
- Bike owned: NC35’s, NC30 sold, MC34 many
- Location: The Netherlands
Re: The weight list.
I did some measurements today on a couple of parts and here & there on some miscellanous items, not sure if these measurements are handy but just check what you may like to know and/or add to the existing weight list (Later more to come...)
* NC35 standard front riders seat pad : 585 grams
* NC35 (Spiegler) gear link rod : 38 grams
* NC35 standard gear link rod : 67 grams
* NC35 titanium gear link rod : 33 grams
* NC35 carb rubbers in total all 4 pcs new : 91 grams
* Exhaust gasket 18391-MN5-650 new : 20 grams each
* NC35 rear pillion seat pad + cable iron strap : 842 grams
* NC35 silhouette single seat pad : 353 grams
* NC30/35 Speedo to gear box assy (44800-MR7-000) used : 92 grams
* NC35 standard RHS air duct excluded the rubber strip : 86 grams
* NC35 standard LHS air duct included the rubber strip : 100 grams
* NC35 Airblade DB screen new + screen rubber : 422 grams
* Pro Bolt NC30/NC35 Titanium pinch bolt : 41 grams
* GSXR1000 rotor flywheel K7-K8 + bolt : 650 grams
* Pro Bolt Titanium front disc bolt : 4 grams each
* Cheap chinese made NC35 indicator housing + clear lens + bulb + 5 cm wires : 75 grams
* NC35 standard rear brake light switch cable assy : 25 grams
* HRC overflow bottle new (19602-NF4-810) : 40 grams
* Front wheel bearing new (FAG 2RSR) : 65 grams
* Thicker walled (RO) vacuum tube : 36 grams
* NC35 (RO) carb screw kit allen type : 82 grams
* Quick action throttle + bolts : 134 grams
* NC35 standard indicator housing + cable assy : 115 grams
* NC35 mirror assy (RHs or LHS) + small spacer + 2 nuts : 259 grams each
* Oil filter (Meiwa) new (52 5110 / H1013 / H1014) : 210 grams
* NC35 rear top mount suspension u-fork (50233-MZ7-000) new : 141 grams
* Braking Wavy front disc used : 1210 grams each
* TSR brake fluid reservoir band new : 24 grams
* NGK-R standard EH9EH spark plug used : 19 grams
* NGK-R Iridium ER9EHIX spark plug new : 18 grams
* NC30 carbon tank pad (brand unknown / used ) : 27 grams
* NC35 Endurance front headlight cover POSH : 128 grams
* NC35 kevlar air ducts RHS or LHS : 130 grams each
* NC35 carbs idle screw set (16029-MR8-900) new : 44 grams
* NC35 standard front riders seat pad : 585 grams
* NC35 (Spiegler) gear link rod : 38 grams
* NC35 standard gear link rod : 67 grams
* NC35 titanium gear link rod : 33 grams
* NC35 carb rubbers in total all 4 pcs new : 91 grams
* Exhaust gasket 18391-MN5-650 new : 20 grams each
* NC35 rear pillion seat pad + cable iron strap : 842 grams
* NC35 silhouette single seat pad : 353 grams
* NC30/35 Speedo to gear box assy (44800-MR7-000) used : 92 grams
* NC35 standard RHS air duct excluded the rubber strip : 86 grams
* NC35 standard LHS air duct included the rubber strip : 100 grams
* NC35 Airblade DB screen new + screen rubber : 422 grams
* Pro Bolt NC30/NC35 Titanium pinch bolt : 41 grams
* GSXR1000 rotor flywheel K7-K8 + bolt : 650 grams
* Pro Bolt Titanium front disc bolt : 4 grams each
* Cheap chinese made NC35 indicator housing + clear lens + bulb + 5 cm wires : 75 grams
* NC35 standard rear brake light switch cable assy : 25 grams
* HRC overflow bottle new (19602-NF4-810) : 40 grams
* Front wheel bearing new (FAG 2RSR) : 65 grams
* Thicker walled (RO) vacuum tube : 36 grams
* NC35 (RO) carb screw kit allen type : 82 grams
* Quick action throttle + bolts : 134 grams
* NC35 standard indicator housing + cable assy : 115 grams
* NC35 mirror assy (RHs or LHS) + small spacer + 2 nuts : 259 grams each
* Oil filter (Meiwa) new (52 5110 / H1013 / H1014) : 210 grams
* NC35 rear top mount suspension u-fork (50233-MZ7-000) new : 141 grams
* Braking Wavy front disc used : 1210 grams each
* TSR brake fluid reservoir band new : 24 grams
* NGK-R standard EH9EH spark plug used : 19 grams
* NGK-R Iridium ER9EHIX spark plug new : 18 grams
* NC30 carbon tank pad (brand unknown / used ) : 27 grams
* NC35 Endurance front headlight cover POSH : 128 grams
* NC35 kevlar air ducts RHS or LHS : 130 grams each
* NC35 carbs idle screw set (16029-MR8-900) new : 44 grams
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"
- micpec
- Site Supporter
- Reactions:
- Posts: 2138
- Joined: Sat May 03, 2008 9:11 pm
- Bike owned: NC35’s, NC30 sold, MC34 many
- Location: The Netherlands
Re: The weight list.
I have just weighed a couple of more small bits and pieces...(again I am 100% not sure if these are measured before, so please add to the weight list if necessary )
* NC35 standard rear wheel nut: 85 grams
* Titanium custom made rear wheel nut: 45 grams
* Titanium Pro-Bolt rear wheel spacer: 117 grams
* NC35 standard rear wheel spacer: 77 grams
* NC35 standard rear wheel nut: 85 grams
* Titanium custom made rear wheel nut: 45 grams
* Titanium Pro-Bolt rear wheel spacer: 117 grams
* NC35 standard rear wheel spacer: 77 grams
"Action without Philosophy is a lethal weapon; Philosophy without action is worthless"
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 10328
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: The weight list.
3" HRC Magtek inc bearings and spacer: 3.5 kg
- CMSMJ1
- Moderators
- Reactions:
- Posts: 9806
- Joined: Thu May 01, 2008 9:42 am
- Bike owned: NC30-No9
- Location: Chesterfield, United Kingdom
Re: The weight list.
You got one eh? Win!
IMPERATOR REX ANGLORUM
The V4 is the law..
NC30 - No9 - my old mate
The V4 is the law..
NC30 - No9 - my old mate
- Drunkn Munky
- Site Supporter
- Reactions:
- Posts: 10328
- Joined: Thu May 01, 2008 9:37 am
- Bike owned: NC30 MC21 TZR FZR GSXR RG MITO
- Location: Kent
Re: The weight list.
Aye Winning!CMSMJ1 wrote:You got one eh? Win!